Production of made-to-measure waterproofing pieces in EPDM for industry

As a result of its expertise and experience in made-to-measure waterproofing solutions, Flexirub offers you pieces suitable for all your needs.

The company has a sales team and a design office with the human and technical expertise to provide an answer for your project. In addition to waterproofing for roofs, tanks, basins and waste water treatment, Flexirub also specialises in the design and production of unique pieces in one or several units.

Some examples of custom-made and on-demand projects. Do not hesitate to contact us, we adapt to your needs.

Water flow piping system
Lifting cushions
multi-reservoir tanks
Floating dock
Flood barrier

EPDM Roofing Systems : Prefabricated rubber membranes EPDM

Flexirub has reinvented EPDM roofing systems with a unique concept and 100% French production.

This concept enables us to deliver you a turnkey solution in a single piece and in the precise shape of your project.
THE DIFFERENT STAGES OF OUR CONCEPT: ENTER THE AGE OF NEW GENERATION WATERPROOFING.

Simplified measurement taking using a Laser

Production of 3D plans by our Design Office

Design of the 3D piece

Delivery on the work site with transport traceability

Simplified, secure membrane installation

Making the waterproofing secure, service life + 50 years

Buildings are moving from a traditional era to a modern era by prefabrication of the material to secure, simplify and save money.

RENOVATING THE SEALING OF YOUR FLAT ROOF

Infiltrations, leaks ... Some people who have built a new house with flat roof sometimes complain of unpleasant disadvantages in terms of waterproofing. The main cause of worries with roof-terraces? The quality of the welding of the bitumen material on site, which weakens the tightness of the flat roof.
However, there is a way to ensure a perfect waterproofing of the roof terrace.

Flexirub offers you a secure solution under Technical AdviceReview technique and totally prefabricated in our factory therefore no welding on the site.
Tightness of a flat roof made of EPDM 3D

Renovating the watertightness of your flat roof
SIMPLIFICATION OF MEASUREMENT WITH THE LASER
SERENITY IN MEASUREMENT
Thanks to the LEICA Disto S910 laser, the dimensions of the roof are recorded in 3D. The survey takes into account the angles, distances and heights of the roof, so the dimensions of the roof are perfectly transcribed. In addition, the laser takes a picture of each raised point, which allows the design office to check each point in case of doubt. Finally, the entire measurement takes place to a single person in record time.
DIGITAL FORMAT RECORDED
The datas are stored in the laser memory as 3D dxf files. Using a USB cable, the datas are then transferred to a computer and sent to the Flexirub design office.
SOME SPECIFICATIONS ABOUT THE USE OF THE LASER
The laser is fixed on a tripod and then installed in the middle of the area to be lifted, the operator then targets the significant points of the roof. If the laser point is not visible due to too brightness, the operator uses the digital viewfinder that appears on the screen or moves to check the sight before recording.
THE ADVANTAGES OF THE LASER

Rapidity of measurements, to one person

Accuracy and quality of the survey

Prevents measurement errors manually

A single file (points and photos)

Possibility of using the laser for other applications (distance-meter, calculation of surface, computation of slope ...)

If you would like more information, do not hesitate to contact PRAXI, our partner specialized in laser measurement: www.praxi.fr
02 30 02 61 49 - This email address is being protected from spambots. You need JavaScript enabled to view it.
Why should you choose an EPDM waterproofing membrane prefabricated to measure in the factory and ready-to-install?
Prefabricated made-to-measure waterproofing in EPDM 2D or 3D

Perfectly adaptable to project shapes, including openings

No folds in the corners

All forms of roof possible

Factory-produced details

Traceability of the piece
Excellent value for money

Multiply the work sites and quadruple your turnover without additional labour costs.

Greatly reduced implementation costs due to the prefabrication

No trimming, no material loss

Maximum longevity of the waterproofing
Extreme resistance because of the hot vulcanisation

Service life of more than 50 years for the EPDM material

Waterproofing piece guaranteed for 10 years

Ultra-resistant, indestructible assemblies

Perfect waterproofing, 100% guaranteed.

Perfect resistance to UV and extreme temperatures (- 40°C to + 120°C)
Simple and very quick to use

Very significant time savings

Ready-to-install waterproofing piece

Simple, very quick bonded or ballasted installation to be implemented with a smaller team

No welding on site

Smaller installation team, no qualifications as a water proofer required

On average installation time divided by 4 compared with traditional solutions that need welding on site
Secure installation without waterproofing work

Freed from the responsibility for the welds which are performed and guaranteed by FLEXIRUB

Secure installation, no more human error for the welding and the details, end of claims due to human error.

No risk of fire or burns, no toxic fumes

PERSONAL ARDUOUSNESS PREVENTION ACCOUNT:
Remove the restrictions of the personal arduousness prevention account
Manual handling of loads

Painful or tiring positions

Extreme temperatures
The EPDM membrane is environmentally friendly

Long service life

EPDM membrane is recyclable and may be reworked in other applications

No fumes released during installation due to the absence of welding on the work site

Perfectly suitable for fitting out green roofs
The advantages of welding by hot vulcanisation
In order to provide you with a perfectly waterproof membrane all the welding is done in the factory by hot vulcanisation. Manufacture by hot vulcanisation is the most qualitative technology for producing a weld between two elastomers.
To produce a perfectly watertight pre-fabricated waterproofing membrane we weld several EPDM panels to each other by vulcanisation.
We place two panels one on top of the other and then insert a band of tape (crude EPDM) which will make it possible to perform the vulcanisation by cross-linking (fusion interlinking the material molecules).
The assembly is pressed automatically by a robot to obtain perfect, indestructible and controlled welding, thus creating a perfectly waterproof, ultra-resistant assembly. After vulcanisation the assembly becomes a single, homogeneous material both physically and chemically.

Ultra-resistant, indestructible assemblies

Perfect waterproofing, 100% guaranteed.

Perfect homogeneity between the various panels making up the finished product

Mechanical resistance of the original sheets reinforced by the total cross-linking (fusion) of the material in the welds.
Welding by hot vulcanisation
The 10 stages in the prefabrication of the EPDM 3D membrane

1 Manufacture of the membrane in 2 dimensions
2 Membrane ready for production in 3 dimensions
3 Preparation of the corners
4 Membrane in 3 dimensions awaiting vulcanisation
5 Welding of the corners and details in 3 dimensions by vulcanisation
6 Corners prefabricated in 3 dimensions
7 Finalised piece in 3 dimensions
8 Folding and rolling of the membrane
9 Piece rolled awaiting logistics preparation
10 Finalised pallet ready for shipping
Today flat roof waterproofing is largely carried out with bitumen or synthetic membranes in two dimensions that must be applied directly on the work site.
OTHER SOLUTIONS
ASSEMBLY OF ROLLS ON THE WORK SITE

STUDY
Manual measurement socket

Installation company

SUPPLY
Order of rolls and accessories from several suppliers

Supply of materials in rolls and accessories

Resulting requirements for equipment (gas, blowtorch, etc.)

Significant load carrying

IMPLEMENTATION
Complicated to use, bad odour, dirty

Installation duration: 1 day

Human intervention (assembly details - corner, chimney, etc.) = risk of errors

Working conditions: Heat, Hot tar, Fire

ARDUOUSNESS (LEGAL)
No load carrying: Manual handling of loads

No more prolonged bent over positions: Painful or tiring positions

No more heat: Extreme temperatures

ECONOMY
Cost of the material + labour = 1 day

Work sites take longer to carry out

Plan more labour

PERSONNEL MANAGEMENT
Man qualified in waterproofing

Compulsory qualification

Complication of hiring

Rigorous control

RESISTANCE OVER THE LONG TERM
Service life 10 to 15 years

ENVIRONMENTAL FRIENDLINESS
No recycling of the material

Gives off fumes
OUR SOLUTION
PRODUCTION IN THE FACTORY IN A SINGLE PIECE: TURNKEY

STUDY
Simple digital Laser measurement

Flexirub Design Office: Time saving, estimate and complete plan (Free)

SUPPLY
A single supplier

A single piece and a single delivery

Very little equipment (mounter, mallet, etc.)

No load carrying

IMPLEMENTATION
Easy to use, just needs to be installed, clean, odourless support

Installation duration divided by 4

No more risk of errors, a single ready-to-install piece with details prefabricated in the factory

Working conditions: Only the installation

ARDUOUSNESS (LEGAL)
The solution enables the personal arduousness prevention account restrictions to be avoided

Saving in administrative management

ECONOMY
Cost of the material + labour + accessories = 0.25 days

Multiply the work sites and quadruple your turnover without additional labour costs

PERSONNEL MANAGEMENT
Building installer

No specific qualifications

Fewer men

Simplicity of the control

RESISTANCE OVER THE LONG TERM
Service life + than 50 years

ENVIRONMENTAL FRIENDLINESS
EPDM may be re-used

Perfectly suitable for fitting out green roofs
How should an EPDM waterproof membrane be fixed or ballasted on a flat roof or a patio roof?
The installation of the EPDM membrane is simple and economical as it requires little labour.
The advantage of EPDM material is that it can be fixed on most supports by bonding or ballasting.
The fully adhered installation system
The fixing system by bonding is a simple technique suitable for most roofing configurations. It is particularly suitable for light structures in wood or metal. The fixing technique by bonding is also suitable when renovating the waterproofing for a flat roof, whatever the support.

Green roof ballasting
The ballast fixing system is the most economical solution for fixing the waterproof membrane.
It also the system that is used most often

Gravel ballasting
The ballast fixing system is the most economical solution for fixing the waterproof membrane.
It also the system that is used most often

Ballasting by pavers on paving supports
The ballast fixing system is the most economical solution for fixing the waterproof membrane.
It also the system that is used most often

Ballasting with inverted insulation
The ballast fixing system is the most economical solution for fixing the waterproof membrane.
It also the system that is used most often
Very fast installation in just 3 steps:

Unrolling the membrane
Unfolding the membrane
Positioning and adjustment before fixing
Flexirub offers you a range of professional accessories to facilitate installation, and finishings for the made-to-measure EPDM membranes.
- All
- Constructions
PROTECTIVE GEOTEXTILE

DRAINAGE LINER

ROOFING VAPOR BARRIER

EPDM CORNER GUARDS

ALUMINIUM RAINWATER DRAIN

ADJUSTABLE ALUMINIUM LEAF GUARD

GALVANIZED STEEL GRAVEL GUARD

EPDM RAINWATER DRAIN

SHAPED ALUMINIUM FLASHING

ALUMINIUM DRIP EDGE FLASHING

FASTENING PROFILE

EPDM MASTIC

DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE

GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT

ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L

EPDM ON EPDM MEMBRANE ADHESIVE - 1 L

INSTALLATION TOOL KIT

REPAIR KIT

SINGLE-USE LIFTING LOOP

ANTI-ROOT BARRIER

WATERPROOF FLANGE COLLAR

PLINTH FOAM

PROTECTIVE COVER FOR CEMENT

PROTECTIVE COVER FOR GYPSUM BOARD

SOFT CONICAL COLLAR EPDM

ANCHOR ACCESSORIES

ALUMINUM ROOF OUTLET

DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING

PVC FEMALE CAP

PVC OVERFLOW WITH 90° BEND

PVC DRAINAGE VALVE

PVC THROUGH WALL CONNECTION

METAL FASTENING CLIPS

METAL RINGS

GEOKIT® Drained and undrained tertre

PVC GEOMEMBRANE 1MM

LDPE FILM 400 µm

SEPARATION GEOGRID

GEOPLUS® SPREADING

THREE-LAYER COEXDALLE

UNDER-PAVING FILM

PROTECTIVE FILM

ANTI-TERMITE FILM

ANTI-TERMITE FILM FACE ADHESIVE

ANTI-RADON FILM DOUBLE-FACE ADHESIVE

CONNECTOR-ANTI-RADON FILM FACE ADHESIVE

MULCHING MAT

GEOTEXTILE FOR EXTERIOR WORK

ANTI-RADON FILM

SUPERIOR ACOUSTIC FOAM

FINISHING PROFILE

MOUNTING KNOBS WITH NAILS AND WASHERS

BASEMENT PROTECTION
PROTECTIVE GEOTEXTILE
This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration.

DRAINAGE LINER
This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration.

It is ideally used as part of the geomembrane waterproofing system. The drainage liner separates two materials and acts as a drain for a fluid or gas even in a high pressure environment and/or with a low gradient. It can replace or add to a gravel filter bed. Requires careful installation: be careful not to crush the filter, avoid countersloping, ensure continuity and make sure the filter is well covered.

ROOFING VAPOR BARRIER
This vapor-barrier film is a synthetic film manufactured by polyethylene granule extrusion. The film is EC certified according to standard NF EN 13984 and has been designed for use in CULTISOL made-to-measure EPDM waterproofing installations. It avoids condensation in the waterproofing materials, in particular in insulation panels.
It is laid down on the flat roof substrate material (concrete, wood or metal). It must be placed on the warm side of the insulation panel. Double-sided adhesive is used to put in place the 10 cm cover and finishings..

EPDM CORNER GUARDS
EPDM membrane corner guards made-to-measure by hot vulcanization.

Used to reinforce the membrane against abrasion and rubbing. Always used with CULTISOL made-to-measure 3D EPDM membranes to ensure roof watertightness.

ALUMINIUM RAINWATER DRAIN
The rainwater drain is made of stamped, folded aluminum. It is specially designed for use with CULTISOL customized EPDM membranes.
Drains are set into the roof material (stone, concrete, wood, or metal)to ensure rainwater runoff from flat roofs. The crimp seal system means it can be easily and securely installed on the spot.

ADJUSTABLE ALUMINIUM LEAF GUARD
This adjustable leaf guard is made of aluminum wire. It is specially designed for use with CULTISOL rainwater downpipes.
They must be positioned over each rainwater downpipe or overflow to avoid clogging by leaves, branches and other rooftop debris. Available in several easy-to-fit diameters.

GALVANIZED STEEL GRAVEL GUARD
This gravel guard is made of galvanized steel. It is specially designed to protect rainwater downpipes against loose dirt and gravel.
They must be positioned over each rainwater downpipe to prevent them being clogged by gravel used as ballast with CULTISOL madeto- measure EPDM membranes.

EPDM RAINWATER DRAIN
The rainwater drain consists of a rigid PVC pipe (or sleeve) and an EPDM membrane flange. The two components are assembled using a special heat welding technique. Supplied in standard 90, 110 and 125 mm dimensions.
Used mainly for roof waterproofing, but can also be used in other waterproofing applications. Cold-sealed with Cultisol EPDM on EPDM adhesive or secure

SHAPED ALUMINIUM FLASHING
The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure CULTISOL made-to-measure EPDM membranes.
The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure FLEXIRUB made-to-measure EPDM membranes.

ALUMINIUM DRIP EDGE FLASHING
Drip edge flashing is shaped by folding a sheet of aluminIum. Specially designed to secure FLEXIRUB made-to-measure EPDM membranes at roof edges.
The drip edge flashing is used to ensure a perfect finish to sealing upstands.
It is secured using screws or hammer fixings every 30 cm in the predrilled

FASTENING PROFILE
The Fastening profile are used to mechanically fix EPDM finishes to the wall. They ensure the watertightness of the solution by blocking the water flowing along the wall. Dimensions: 3,74 cm x 3,05 m (sold by 5)

EPDM MASTIC
Flexirub’s EPDM adhesive is a single-component MS polymer-based moisture cured adhesive. For use as a waterproofing and adhesive agent with EPDM membranes. Will secure any kind of bonding. (Please contact Flexirub’s technical department if in doubt over compatibility with certain specific materials)

Perfect for finishes or for repairing torn or perforated membranes. Multi-purpose adhesive designed to bond with many types of materials: wood, concrete, metal, etc. Before applying, make sure the EPDM surface is clean and free of oil and grease to guarantee perfect bonding. (use only alcohol-based and not petroleum-based cleaning agents). Fiche De Données Sécurité Mastic EPDM

DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
Double-sided butyl adhesive allowing the junction between EPDM membrane and various fixing supports

Used in addition to glues and sealants

Ideal for securing a flexible EPDM collar or for fixing a sealing gauge

Dimensions: Width 25 mm or 50 mm or custom-made

GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
Adhesive based on acrylic resin allowing adhesion of the EPDM membrane on wood and concrete support
• Solvent-free and odorless glue
• Gluing by simple gluing
• Allows repositioning of the membrane

Up to 30 minutes after application Average consumption: 0.25 liters per 1 m² Volume: 2 L pot or 8 L bucket
Fiche De Données Sécurité Colle Membrane EPDM Sur Support Bois-Béton

ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
A synthetic polymer contact adhesive used to fix the EPDM membrane to any surface, such as masonry, wood, metal or other compatible materials. Available in 5-liter cans.

Fiche De Données Sécurité Colle Membrane EPDM Tout Support

EPDM ON EPDM MEMBRANE ADHESIVE - 1 L
A liquid butyl-based adhesive for EPDM membrane to membrane assembly, and to guarantee that the protection remains leak proof. Available in 1-liter cans.

Fiche De Données Sécurité Colle Membrane EPDM Sur EPDM

INSTALLATION TOOL KIT
Kit of installation tools allowing a perfect installation of the membrane and accessories Composed of a pair of scissors, a marking pencil, a brush, a roller, a masking tape, a mastic cartridge and a putty gun.

REPAIR KIT
Kit consisting of a square EPDM membrane, a butyl glue, a mastic cartridge And abrasive paper to allow cleaning before repairing a damaged membrane

SINGLE-USE LIFTING LOOP
Flexirub supplies three types of lifting loop to facilitate movement of the EPDM geomembrane rolls.
Dimensions:
- Maximum working load of 500 kg: 30 mm x 5 m
- Maximum working load of 1000 kg: 60 mm x 5 m
- Maximum working load of 1500 kg: 90 mm x 5 m

ANTI-ROOT BARRIER
The root barrier protects sensitive areas by deflecting roots downwards. The Isofilma root barrier consists of a non-woven, 100% polypropylene fiber geotextile, coated with polypropylene on both sides. This combination creates an extremely strong barrier that is impenetrable to roots whilst guaranteeing healthy development of trees and plantings. Dimensions: 1.40 x 25 m

ADVANTAGES

Exceptionally long-lasting (25 years)

Impact resistant

Light and easy to use

Resistant to bacteria and chemicals

Specific anti-UV treatment

No risk to the environment - product is fully recyclable

WATERPROOF FLANGE COLLAR
The waterproof flange collar is the only 100% waterproof solution on the market. It is composed of two distinct parts: - A first sticker that allows to adjust its drilling, to avoid tearing and to guide the pipe during the installation. - A second part assembled by clamping, consisting of two flanges and a joint.

PLINTH FOAM
The 3 mm skirting foam contributes to the acoustic and thermal insulation of floating floors and floor coverings. The Isofilma skirting foam is produced by non-polluting processes and is totally free of chlorine, emollients, halogens, sulfur, silicones and stabilizers from heavy metals.
Dimensions : 100 mm x 50 m.

ADVANTAGES

Avoids sound bridges and tile cracks

Heatable floor heating

Respects the expansion of the parquet

Two thicknesses available for different performance levels

PROTECTIVE COVER FOR CEMENT
Translucent cover to protect the cement from moisture. Dimensions : 1,25 m (2 x 0,6 m) x 1,70 m.

ADVANTAGE
Allows cement storage outside

PROTECTIVE COVER FOR GYPSUM BOARD
Translucent cover to protect drywall against moisture.
Dimensions: 4 mx 1.8 m or 4.5 mx 1.8 m.

ADVANTAGE
Allows storage of plasterboard outside

SOFT CONICAL COLLAR EPDM
The flexible conical flange is the ideal solution for all connections on variable diameters. It is manufactured from a base and an EPDM sleeve manufactured in a cone with a diameter of 50mm to a diameter of 200mm. The assembly is fully assembled by hot vulcanization

ANCHOR ACCESSORIES
Flexirub offers different accessories to facilitate the anchoring of its membranes. They are classified into two distinct categories: eyelets and fastening rings.

Features:

Stainless steel eyelets: Øint 9 mm or 15 mm or 25 mm
Nickel-plated brass eyelets: Øint 40 mm
"Half-moon" or "triangle" rings: Ø 6 mm x 50 mm

ALUMINUM ROOF OUTLET
The roof outlet is made of stamped, folded aluminum. It is specially designed for use with FLEXIRUB customized EPDM membranes
Overflows are set into the roof material (stone, concrete, wood, or metal) so as to ensure rainwater runoff in case the downpipes cannot cope. The crimp seal system means it can be easily and securely installed on the spot.

DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
Allows to connect the widths of vapor barrier film to each other
• Facilitates the fixation of the film on the support

Format: 60mmx20m

PVC FEMALE CAP
Female-threaded PVC end caps are designed to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
They are used as end caps on CULTISOL EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints.

PVC OVERFLOW WITH 90° BEND
The 90° elbow fittings are threaded at both ends to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
They are used as drain outlet accessories on Flexirub EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints.

PVC DRAINAGE VALVE
PVC-uH valves are simple quarter turn open/shut fittings. Threaded at both ends to allow easy connexion to other pipes. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.

PVC THROUGH WALL CONNECTION
Allows the formation of a tight connection between the filling elements (tap, supply pipe, etc.) and the interior of the flexible tank
• Consists of a threaded spindle, two nuts and two EPDM flat seals

METAL FASTENING CLIPS
Permit secure attachment of ground protection geotextile

METAL RINGS
Stainless steel for excellent resistance to corrosion and aging
• Made by hot forging for superior mechanical strength

Format: Triangle and Half Moon

GEOKIT® Drained and undrained tertre
This GeoKit® contains the following components:

1 separation geogrid
1 separation geotextile 150 g / m²
1 LDPE film 0.4 mm (in the case of the drained mound)
1 watertight flange collar (in the case of the drained mound)
1 adhesive collar (in the case of the drained mound)

PVC GEOMEMBRANE 1MM
Complies with NF DTU 64.1
• Allows waterproofing of drained sand filters

LDPE FILM 400 µm
This black 0.4 mm LDPE coextruded film offers very good mechanical resistance properties, thanks to its triple-layer technology. Rotproof and waterproof.
Black LDPE 400 μm film is used in self-standing wastewater treatment systems, in particular to ensure watertightness in watertight drained sand filter, raised bed or compact sand filter systems. It can also be used in undrained sand filter systems, for lateral watertightness.

SEPARATION GEOGRID
The separation geogrid, or filtration grid, is manufactured from High- Density Polyethylene (HDPE). The material is highly-resilient while maintaining a degree of flexibility. For optimal efficiency, the geogrid must be used with a separation and filtration geotextile to retain the finest particles and avoid clogging.

The geogrid is mainyl used in waste-water treatment installations. It is used in particular to separate different granular layers. It is mandatory with a sand filter or other artifical soil filtration systems.

GEOPLUS® SPREADING
Allows separation of gravel and topsoil in trenches

THREE-LAYER COEXDALLE
• Prevents moisture rise by capillarities
• Complies with DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards

Three-layer polyethylene three-layer underpadding film
• Prevents moisture rise by capillarity
• Conforms to DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards

UNDER-PAVING FILM
Film under translucent plowing, single-layer polyethylene
• Prevents moisture rise by capillarity
• Conforms to DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards

Format : 3 m x 66 m - 6 m x 33 m - 3 m x 50 m - 6 m x 25 m - 6 m x 20 m

PROTECTIVE FILM
Protective film made of polyethylene
• Suitable for all types of work
• Easy to install

ANTI-TERMITE FILM
Three layer film with a thickness of 150 μm in polyethylene
• Created a physicochemical barrier against termites
• Non-washable film which prevents any diffusion of active material
• Product certified CTB-P + by the FCBA
• Guaranteed 10 years

Format : 5 m x 33 m

ANTI-TERMITE FILM FACE ADHESIVE
Format : 75 mm x 66 m

ANTI-RADON FILM DOUBLE-FACE ADHESIVE
Format : 19 mm x 20 m

CONNECTOR-ANTI-RADON FILM FACE ADHESIVE
Format : 50 mm x 25 m

MULCHING MAT
Woven polypropylene green mulch fabric
• UV-treated product
• Fastening by staple
• Permeable to water and air

GEOTEXTILE FOR EXTERIOR WORK
Geotextile in nonwoven needlepunched polypropylene 100 g / m²
• Stabilizes the floors before laying a pavement or a terrace
• Allows protection of drainage pipes

ANTI-RADON FILM
Film with a thickness of 200 μm in polyamide
• Created a genuine barrier to radon gas in construction
• Indoor / outdoor concentration ratio of 0.45% versus 68% for a conventional 200 μm polyethylene film

SUPERIOR ACOUSTIC FOAM
Polyethylene foam with reticulated closed cells
• Allows acoustic and thermal insulation
• Compatible with underfloor heating

FINISHING PROFILE
Profile for fixing the underbody protection to the wall

MOUNTING KNOBS WITH NAILS AND WASHERS
Nails and washers for fixing the profile to the underbody protection

BASEMENT PROTECTION
Polyethylene underbody protection
Protects bituminous paint Size: 1 mx 20 m - 1.5 mx 20 m - 2 mx 20 m - 2.5 mx 20 m - 3 mx 20 m

In order to facilitate the implementation of your waterproofing project Flexirub will provide you with its catalogue and a set of technical documents.

Browse our on-line catalogue
Your documents
Fiche Projet toitures
Size: 350.22 KB Format: PDF
Preview

Our team of specialists is available to support you in your project. To enable us to come back to you with a detailed, costed proposal please take the time to complete your project sheet before making your request for an estimate.

REQUEST YOUR ESTIMATE

EPDM Waterproofing of foundations

Concept

Advantages

EPDM 2D

EPDM 3D

INSTALLATION

ACCESSORIES

Documentation

The EPDM geomembrane used by Flexirub is a light, waterproof, elastic elastomer which is ideal for damp proofing foundations.
This solution has many advantages in comparison with the other products offered on the market:

A wide range suitable for all configurations

2D geomembranes in standard sizes

Made-to-measure manufacture in 2D or 3D

Several thicknesses available depending on the desired performance (up to 2 mm thickness for optimum resistance to puncture)

A quality offer

10-year guarantee

Short lead times due to our responsive teams

Falls within French standards concerning “Building Works - Small Masonry Unit Walls - Partitions and Walls” (NF DTU 20.1) and “Tanking Works” (NF DTU 14.1)

Meets the European Regulation for construction products in the case of tanking work (NF EN 13 361) and foundation work (NF EN 14 150)

2D and 3D waterproofing of foundations prefabricated in EPDM

As a result of its experience in building waterproofing Flexirub has been able to develop 2 distinct ranges of foundation protection:
EPDM 2D foundation protection
is perfect for waterproofing the simplest constructions such as houses and buildings with linear walls.

EPDM 3D foundation protection
make it possible to provide waterproofing for more complex constructions such as tanking a cellar or constructions with non-linear walls These three-dimensional protections, which are made-to-measure, will adapt perfectly to the contours of the foundations you wish to protect.

Protection De Soubassement EPDM 2D

Protection De Soubassement EPDM 3D

Cuvelage EPDM

A clean, secure alternative
Today the waterproofing of foundations is often carried out with bitumen paint, a particularly harmful chemical which is very restrictive in its use. Unlike the Flexirub EPDM foundation protections this method always incurs several problems.

Why should you choose an EPDM foundation protection prefabricated to measure in the factory and ready-to-install?

The EPDM 2D or 3D waterproofing membrane replaces the two products usually used.

Prefabricated waterproofing piece that is ready to install

Removes and replaces the use of 2 products: bitumen paint and plastic foundation protection

Standard sizes or made-to-measure

Available in 2 or 3 dimensions according to the shape of the foundations to be waterproofed

Simple and quick to use in a smaller team as it is a 2-in-1 solution

2-in-1 product replacing bitumen paint and plastic foundation protection

No drying time or positioning of a second layer

No welding on site

Smaller installation team

On average installation time divided by 4 compared with traditional solutions that need welding on site

EPDM foundation protection is assembled in the factory by hot vulcanisation, providing extreme resistance

Maximum solidity of the welds due to the hot vulcanisation

Excellent mechanical resistance (traction elasticity, static puncture)

Waterproofing piece guaranteed for 10 years

Service life of more than 50 years for the EPDM material

Perfect resistance to UV and extreme temperatures (- 40°C to + 120°C)

The EPDM protection is fixed in complete safety, without on-site welding

No flame welding or hot air soldering irons on the work site

No risk of fire or burns

No fumes

No odour

A mechanical fixing system to optimise the time required for installing the protection

Mechanical fixing using the fixing profile

Simplicity of finishes with a complete range of accessories and tools

An economical solution that is more environmentally friendly

No bitumen paint or foundation protection costs

Significantly lower labour costs

No trimming or material loss

Maximum longevity of the waterproofing

Synthetic membrane that is more ecological than bitumen paints

Flexirub offers a range of EPDM 2D foundation protections for waterproofing of foundations.
The 2D foundation protection offered by Flexirub make it possible to make most constructions waterproof.
This 2-in-1 product effectively replaces the bitumen paint and the standard foundation protection and is very simple to use.

These foundation protections are sold in 20 metre rolls and are available for heights from 50 to 155 cm so as to adapt to various types of construction
For what applications?

Detached house

Building (residential and non-residential: offices, industry, etc.)

The advantages of EPDM 2D foundation protections

A wide range of EPDM geomembranes in standard sizes will make it possible to adapt to most configurations

Made-to-measure foundation protection is available depending on your requirements

Short lead times because our teams are responsive

Waterproofing piece guaranteed for 10 years

Flexirub offers a range of EPDM 3D foundation protection for provide waterproofing for more complex constructions.
Made-to-measure 3D foundation protection: a Flexirub exclusivity
The made-to-measure 3D foundation protections adapt to the shape of the foundations, offering perfect waterproofing for all types of construction. As soon as the waterproof piece is designed Flexirub incorporates all the finishes in the factory to obtain an ultra-high performance waterproofing solution that is easy to install. In particular, using this technique we are able to produce made-to-measure tanking in EPDM 3D to guarantee the waterproofing of cellars or small car parks..
For what applications?

House with non-linear walls

Building with non-linear walls/li>
Cellar

Car park or garage

The advantages of EPDM 3D foundation protections

Made-to-measure manufacture in three dimensions to guarantee optimum waterproofing for the most complex constructions

Several thicknesses available depending on the desired performance (up to 2 mm thickness for optimum resistance to puncture)

10-year guarantee

A simplified, secure work site
The installation of EPDM foundation protections on the foundations is very simple and carried out in complete safety.
Implementation
Installation of the EPDM foundation protection

Step 1
Preparation of the support on which the membrane will be applied (no dust, grease or foreign bodies). The membrane can be fixed onto insulation or even the foundation itself.

Step 2
Preparation of the support on which the membrane will be applied (no dust, grease or foreign bodies). The membrane can be fixed onto insulation or even the foundation itself.

Step 3
Application of the EPDM adhesive to the entire support on both faces to be bonded (support and EPDM membrane). Partial bonding (supports or strips) because this is a temporary fix.

Step 4
Wait until the adhesive is dry to the touch and then apply the EPDM membrane to the support. Adjust the membrane progressively taking advantage of the elasticity of the EPDM.

Step 5
Drilling in the starter holes of the fixing profile (spacing 20 cm).

Step 6
Final attachment of the fixing profile to the membrane using drop-in anchors.
The advantages

Single layer waterproofing to be installed on external walls

Clean material: no harmful fumes or risk of splashing

Ability to adjust the membrane on the support due to the elasticity of the EPDM

No welding to be performed on the work site

Numerous accessories available

Flexirub offers you a range of professional accessories to facilitate installation, and finishings for the made-to-measure EPDM membranes.

All

Constructions

PROTECTIVE GEOTEXTILE

DRAINAGE LINER

ROOFING VAPOR BARRIER

EPDM CORNER GUARDS

ALUMINIUM RAINWATER DRAIN

ADJUSTABLE ALUMINIUM LEAF GUARD

GALVANIZED STEEL GRAVEL GUARD

EPDM RAINWATER DRAIN

SHAPED ALUMINIUM FLASHING

ALUMINIUM DRIP EDGE FLASHING

FASTENING PROFILE

EPDM MASTIC

DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE

GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT

ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L

EPDM ON EPDM MEMBRANE ADHESIVE - 1 L

INSTALLATION TOOL KIT

REPAIR KIT

SINGLE-USE LIFTING LOOP

ANTI-ROOT BARRIER

WATERPROOF FLANGE COLLAR

PLINTH FOAM

PROTECTIVE COVER FOR CEMENT

PROTECTIVE COVER FOR GYPSUM BOARD

SOFT CONICAL COLLAR EPDM

ANCHOR ACCESSORIES

ALUMINUM ROOF OUTLET

DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING

PVC FEMALE CAP

PVC OVERFLOW WITH 90° BEND

PVC DRAINAGE VALVE

PVC THROUGH WALL CONNECTION

METAL FASTENING CLIPS

METAL RINGS

GEOKIT® Drained and undrained tertre

PVC GEOMEMBRANE 1MM

LDPE FILM 400 µm

SEPARATION GEOGRID

GEOPLUS® SPREADING

THREE-LAYER COEXDALLE

UNDER-PAVING FILM

PROTECTIVE FILM

ANTI-TERMITE FILM

ANTI-TERMITE FILM FACE ADHESIVE

ANTI-RADON FILM DOUBLE-FACE ADHESIVE

CONNECTOR-ANTI-RADON FILM FACE ADHESIVE

MULCHING MAT

GEOTEXTILE FOR EXTERIOR WORK

ANTI-RADON FILM

SUPERIOR ACOUSTIC FOAM

FINISHING PROFILE

MOUNTING KNOBS WITH NAILS AND WASHERS

BASEMENT PROTECTION

PROTECTIVE GEOTEXTILE
This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration.

DRAINAGE LINER
This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration.

It is ideally used as part of the geomembrane waterproofing system. The drainage liner separates two materials and acts as a drain for a fluid or gas even in a high pressure environment and/or with a low gradient. It can replace or add to a gravel filter bed. Requires careful installation: be careful not to crush the filter, avoid countersloping, ensure continuity and make sure the filter is well covered.

ROOFING VAPOR BARRIER
This vapor-barrier film is a synthetic film manufactured by polyethylene granule extrusion. The film is EC certified according to standard NF EN 13984 and has been designed for use in CULTISOL made-to-measure EPDM waterproofing installations. It avoids condensation in the waterproofing materials, in particular in insulation panels.
It is laid down on the flat roof substrate material (concrete, wood or metal). It must be placed on the warm side of the insulation panel. Double-sided adhesive is used to put in place the 10 cm cover and finishings..

EPDM CORNER GUARDS
EPDM membrane corner guards made-to-measure by hot vulcanization.

Used to reinforce the membrane against abrasion and rubbing. Always used with CULTISOL made-to-measure 3D EPDM membranes to ensure roof watertightness.

ALUMINIUM RAINWATER DRAIN
The rainwater drain is made of stamped, folded aluminum. It is specially designed for use with CULTISOL customized EPDM membranes.
Drains are set into the roof material (stone, concrete, wood, or metal)to ensure rainwater runoff from flat roofs. The crimp seal system means it can be easily and securely installed on the spot.

ADJUSTABLE ALUMINIUM LEAF GUARD
This adjustable leaf guard is made of aluminum wire. It is specially designed for use with CULTISOL rainwater downpipes.
They must be positioned over each rainwater downpipe or overflow to avoid clogging by leaves, branches and other rooftop debris. Available in several easy-to-fit diameters.

GALVANIZED STEEL GRAVEL GUARD
This gravel guard is made of galvanized steel. It is specially designed to protect rainwater downpipes against loose dirt and gravel.
They must be positioned over each rainwater downpipe to prevent them being clogged by gravel used as ballast with CULTISOL madeto- measure EPDM membranes.

EPDM RAINWATER DRAIN
The rainwater drain consists of a rigid PVC pipe (or sleeve) and an EPDM membrane flange. The two components are assembled using a special heat welding technique. Supplied in standard 90, 110 and 125 mm dimensions.
Used mainly for roof waterproofing, but can also be used in other waterproofing applications. Cold-sealed with Cultisol EPDM on EPDM adhesive or secure

SHAPED ALUMINIUM FLASHING
The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure CULTISOL made-to-measure EPDM membranes.
The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure FLEXIRUB made-to-measure EPDM membranes.

ALUMINIUM DRIP EDGE FLASHING
Drip edge flashing is shaped by folding a sheet of aluminIum. Specially designed to secure FLEXIRUB made-to-measure EPDM membranes at roof edges.
The drip edge flashing is used to ensure a perfect finish to sealing upstands.
It is secured using screws or hammer fixings every 30 cm in the predrilled

FASTENING PROFILE
The Fastening profile are used to mechanically fix EPDM finishes to the wall. They ensure the watertightness of the solution by blocking the water flowing along the wall. Dimensions: 3,74 cm x 3,05 m (sold by 5)

EPDM MASTIC
Flexirub’s EPDM adhesive is a single-component MS polymer-based moisture cured adhesive. For use as a waterproofing and adhesive agent with EPDM membranes. Will secure any kind of bonding. (Please contact Flexirub’s technical department if in doubt over compatibility with certain specific materials)

Perfect for finishes or for repairing torn or perforated membranes. Multi-purpose adhesive designed to bond with many types of materials: wood, concrete, metal, etc. Before applying, make sure the EPDM surface is clean and free of oil and grease to guarantee perfect bonding. (use only alcohol-based and not petroleum-based cleaning agents). Fiche De Données Sécurité Mastic EPDM

DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
Double-sided butyl adhesive allowing the junction between EPDM membrane and various fixing supports

Used in addition to glues and sealants

Ideal for securing a flexible EPDM collar or for fixing a sealing gauge

Dimensions: Width 25 mm or 50 mm or custom-made

GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
Adhesive based on acrylic resin allowing adhesion of the EPDM membrane on wood and concrete support
• Solvent-free and odorless glue
• Gluing by simple gluing
• Allows repositioning of the membrane

Up to 30 minutes after application Average consumption: 0.25 liters per 1 m² Volume: 2 L pot or 8 L bucket
Fiche De Données Sécurité Colle Membrane EPDM Sur Support Bois-Béton

ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
A synthetic polymer contact adhesive used to fix the EPDM membrane to any surface, such as masonry, wood, metal or other compatible materials. Available in 5-liter cans.

Fiche De Données Sécurité Colle Membrane EPDM Tout Support

EPDM ON EPDM MEMBRANE ADHESIVE - 1 L
A liquid butyl-based adhesive for EPDM membrane to membrane assembly, and to guarantee that the protection remains leak proof. Available in 1-liter cans.

Fiche De Données Sécurité Colle Membrane EPDM Sur EPDM

INSTALLATION TOOL KIT
Kit of installation tools allowing a perfect installation of the membrane and accessories Composed of a pair of scissors, a marking pencil, a brush, a roller, a masking tape, a mastic cartridge and a putty gun.

REPAIR KIT
Kit consisting of a square EPDM membrane, a butyl glue, a mastic cartridge And abrasive paper to allow cleaning before repairing a damaged membrane

SINGLE-USE LIFTING LOOP
Flexirub supplies three types of lifting loop to facilitate movement of the EPDM geomembrane rolls.
Dimensions:
- Maximum working load of 500 kg: 30 mm x 5 m
- Maximum working load of 1000 kg: 60 mm x 5 m
- Maximum working load of 1500 kg: 90 mm x 5 m

ANTI-ROOT BARRIER
The root barrier protects sensitive areas by deflecting roots downwards. The Isofilma root barrier consists of a non-woven, 100% polypropylene fiber geotextile, coated with polypropylene on both sides. This combination creates an extremely strong barrier that is impenetrable to roots whilst guaranteeing healthy development of trees and plantings. Dimensions: 1.40 x 25 m

ADVANTAGES

Exceptionally long-lasting (25 years)

Impact resistant

Light and easy to use

Resistant to bacteria and chemicals

Specific anti-UV treatment

No risk to the environment - product is fully recyclable

WATERPROOF FLANGE COLLAR
The waterproof flange collar is the only 100% waterproof solution on the market. It is composed of two distinct parts: - A first sticker that allows to adjust its drilling, to avoid tearing and to guide the pipe during the installation. - A second part assembled by clamping, consisting of two flanges and a joint.

PLINTH FOAM
The 3 mm skirting foam contributes to the acoustic and thermal insulation of floating floors and floor coverings. The Isofilma skirting foam is produced by non-polluting processes and is totally free of chlorine, emollients, halogens, sulfur, silicones and stabilizers from heavy metals.
Dimensions : 100 mm x 50 m.

ADVANTAGES

Avoids sound bridges and tile cracks

Heatable floor heating

Respects the expansion of the parquet

Two thicknesses available for different performance levels

PROTECTIVE COVER FOR CEMENT
Translucent cover to protect the cement from moisture. Dimensions : 1,25 m (2 x 0,6 m) x 1,70 m.

ADVANTAGE
Allows cement storage outside

PROTECTIVE COVER FOR GYPSUM BOARD
Translucent cover to protect drywall against moisture.
Dimensions: 4 mx 1.8 m or 4.5 mx 1.8 m.

ADVANTAGE
Allows storage of plasterboard outside

SOFT CONICAL COLLAR EPDM
The flexible conical flange is the ideal solution for all connections on variable diameters. It is manufactured from a base and an EPDM sleeve manufactured in a cone with a diameter of 50mm to a diameter of 200mm. The assembly is fully assembled by hot vulcanization

ANCHOR ACCESSORIES
Flexirub offers different accessories to facilitate the anchoring of its membranes. They are classified into two distinct categories: eyelets and fastening rings.

Features:

Stainless steel eyelets: Øint 9 mm or 15 mm or 25 mm
Nickel-plated brass eyelets: Øint 40 mm
"Half-moon" or "triangle" rings: Ø 6 mm x 50 mm

ALUMINUM ROOF OUTLET
The roof outlet is made of stamped, folded aluminum. It is specially designed for use with FLEXIRUB customized EPDM membranes
Overflows are set into the roof material (stone, concrete, wood, or metal) so as to ensure rainwater runoff in case the downpipes cannot cope. The crimp seal system means it can be easily and securely installed on the spot.

DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
Allows to connect the widths of vapor barrier film to each other
• Facilitates the fixation of the film on the support

Format: 60mmx20m

PVC FEMALE CAP
Female-threaded PVC end caps are designed to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
They are used as end caps on CULTISOL EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints.

PVC OVERFLOW WITH 90° BEND
The 90° elbow fittings are threaded at both ends to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
They are used as drain outlet accessories on Flexirub EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints.

PVC DRAINAGE VALVE
PVC-uH valves are simple quarter turn open/shut fittings. Threaded at both ends to allow easy connexion to other pipes. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.

PVC THROUGH WALL CONNECTION
Allows the formation of a tight connection between the filling elements (tap, supply pipe, etc.) and the interior of the flexible tank
• Consists of a threaded spindle, two nuts and two EPDM flat seals

METAL FASTENING CLIPS
Permit secure attachment of ground protection geotextile

METAL RINGS
Stainless steel for excellent resistance to corrosion and aging
• Made by hot forging for superior mechanical strength

Format: Triangle and Half Moon

GEOKIT® Drained and undrained tertre
This GeoKit® contains the following components:

1 separation geogrid
1 separation geotextile 150 g / m²
1 LDPE film 0.4 mm (in the case of the drained mound)
1 watertight flange collar (in the case of the drained mound)
1 adhesive collar (in the case of the drained mound)

PVC GEOMEMBRANE 1MM
Complies with NF DTU 64.1
• Allows waterproofing of drained sand filters

LDPE FILM 400 µm
This black 0.4 mm LDPE coextruded film offers very good mechanical resistance properties, thanks to its triple-layer technology. Rotproof and waterproof.
Black LDPE 400 μm film is used in self-standing wastewater treatment systems, in particular to ensure watertightness in watertight drained sand filter, raised bed or compact sand filter systems. It can also be used in undrained sand filter systems, for lateral watertightness.

SEPARATION GEOGRID
The separation geogrid, or filtration grid, is manufactured from High- Density Polyethylene (HDPE). The material is highly-resilient while maintaining a degree of flexibility. For optimal efficiency, the geogrid must be used with a separation and filtration geotextile to retain the finest particles and avoid clogging.

The geogrid is mainyl used in waste-water treatment installations. It is used in particular to separate different granular layers. It is mandatory with a sand filter or other artifical soil filtration systems.

GEOPLUS® SPREADING
Allows separation of gravel and topsoil in trenches

THREE-LAYER COEXDALLE
• Prevents moisture rise by capillarities
• Complies with DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards

Three-layer polyethylene three-layer underpadding film
• Prevents moisture rise by capillarity
• Conforms to DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards

UNDER-PAVING FILM
Film under translucent plowing, single-layer polyethylene
• Prevents moisture rise by capillarity
• Conforms to DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards

Format : 3 m x 66 m - 6 m x 33 m - 3 m x 50 m - 6 m x 25 m - 6 m x 20 m

PROTECTIVE FILM
Protective film made of polyethylene
• Suitable for all types of work
• Easy to install

ANTI-TERMITE FILM
Three layer film with a thickness of 150 μm in polyethylene
• Created a physicochemical barrier against termites
• Non-washable film which prevents any diffusion of active material
• Product certified CTB-P + by the FCBA
• Guaranteed 10 years

Format : 5 m x 33 m

ANTI-TERMITE FILM FACE ADHESIVE
Format : 75 mm x 66 m

ANTI-RADON FILM DOUBLE-FACE ADHESIVE
Format : 19 mm x 20 m

CONNECTOR-ANTI-RADON FILM FACE ADHESIVE
Format : 50 mm x 25 m

MULCHING MAT
Woven polypropylene green mulch fabric
• UV-treated product
• Fastening by staple
• Permeable to water and air

GEOTEXTILE FOR EXTERIOR WORK
Geotextile in nonwoven needlepunched polypropylene 100 g / m²
• Stabilizes the floors before laying a pavement or a terrace
• Allows protection of drainage pipes

ANTI-RADON FILM
Film with a thickness of 200 μm in polyamide
• Created a genuine barrier to radon gas in construction
• Indoor / outdoor concentration ratio of 0.45% versus 68% for a conventional 200 μm polyethylene film

SUPERIOR ACOUSTIC FOAM
Polyethylene foam with reticulated closed cells
• Allows acoustic and thermal insulation
• Compatible with underfloor heating

FINISHING PROFILE
Profile for fixing the underbody protection to the wall

MOUNTING KNOBS WITH NAILS AND WASHERS
Nails and washers for fixing the profile to the underbody protection

BASEMENT PROTECTION
Polyethylene underbody protection
Protects bituminous paint Size: 1 mx 20 m - 1.5 mx 20 m - 2 mx 20 m - 2.5 mx 20 m - 3 mx 20 m

In order to facilitate the implementation of your waterproofing project Flexirub will provide you with its catalogue and a set of technical documents:

BROWSE THE CATALOGUE
Flexirub documentation:
EDPM waterproofing of foundations
Fiche Projet fondations
Size: 416.28 KB Format: PDF
Preview

Our team of specialists is available to support you in your project. To enable us to come back to you with a detailed, costed proposal please take the time to complete your project sheet before making your request for an estimate.

REQUEST YOUR ESTIMATE

Waterproofing of facades

ADVANTAGES

CONCEPT

3 MODELS OF STRIP

APPLICATIONS

ACCESSORIES

Documentation

Why should you choose EPDM strips for waterproofing, airtightness and damp-proofing façades?

The waterproofing strips are ultra-high performance, suitable for any type of support

Exceptional air- and water-tightness (water vapour transmission factor μ = 2,000,000 for EPDM/butyl)

Can be used on any type of support for any applications linked to impermeability

Standard sizes or made to measure

Meets French standards

The EPDM waterproofing strips are produced by hot vulcanisation giving extreme resistance

Maximum solidity of the welds due to the hot vulcanisation

Excellent mechanical resistance (traction, elasticity, static puncture)

Strip guaranteed for 10 years

Service life of more than 50 years for the EPDM material

Perfect resistance to UV and extreme temperatures (- 40°C to + 120°C)

An economical solution that is more environmentally friendly

Clean, non-toxic material guaranteeing hazard-free installation

Significantly lower labour costs

No trimming or material loss

Maximum longevity of the waterproofing

Synthetic membrane that is more ecological than bitumen paints

The EPDM strips are fixed in complete safety, without on-site welding

No flame welding or hot air soldering irons on the work site

No risk of fire or burns

No fumes

No odour

A self-adhesive fixing system to optimise the installation time for the waterproof strips

Self-adhesive fixing (EPDM/butyl) or by bonding (EPDM)

Simplicity of finishes with a complete range of accessories and tools

Simple and quick to use in a smaller team, and no welding

Quick, easy installation

Removes the use of chemical and bituminous waterproofing products

No welding on site

Smaller installation team

As a result of its experience in building waterproofing
Flexirub has been able to develop a new generation
of multi-use waterproofing strips

Throughout their life building façades are subjected to weather conditions which vary enormously: action of wind and water, thermal movements or even large variations in temperature.

Building waterproofing must therefore combine a whole series of requirements to resist these continual attacks: solidity, longevity, elasticity, resistance to bad weather and air pollution. The Flexirub waterproofing system meets all these requirements.
The EPDM strips which Flexirub has developed make it possible to provide high quality waterproofing for your façades, windows and wood or masonry walls.

The EPDM strip is a light, waterproof, elastic elastomer membrane. Its formulation was developed to meet the requirements for waterproofing façades.
This system prevents rain and water from penetrating buildings and air leaks into the structure.

Flexirub offers a range of EPDM waterproofing strips.

EPDM strips
1 mm membrane
25 metre roll
10 to 60 cm wide.
The Flexirub EPDM strip for façades is a rubber-based elastomer waterproofing membrane, EPDM 1 mm, which guarantees a high water vapour transmission factor. The EPDM strip has a 2-sided textile footprint so as to obtain maximum adhesion to the support. It can be put in place with adhesive or mastic depending on the support on which this waterproofing membrane is placed.
Advantages of EPDM strips

Perfectly waterproof membrane

High water vapour transmission factor
(μ = 98,000)

Adapts to the movements of the building due to the elasticity of the EPDM

EPDM/Butyl strips
1.6 mm self-adhesive membrane
20 metre roll
10 to 60 cm wide
The self-adhesive EPDM/Butyl strip for façades from Flexirub is a waterproofing strip made up of one 1 mm thick layer of EPDM and one adhesive layer of 0.6 mm thick Butyl. The combination of EPDM and Butyl makes it possible to obtain a 1.6 mm thick waterproofing strip with an exceptional water vapour transmission factor. In addition, the Butyl-based adhesive strips facilitate positioning when the waterproofing is being put in place.
Advantages of self-adhesive EPDM/Butyl strips

Simple to install because of the self-adhesive Butyl

Perfectly waterproof membrane

High water vapour transmission factor
(μ = 98,000)

Adapts to the movements of the building due to the elasticity of the EPDM

EPDM levelling course strips
Waterproofing membrane
preventing damp from rising
25 metre rolls
20 to 40 cm wide.
Thickness: 0.6 mm or 0.75 mm.
The Flexirub EPDM levelling course strip is an EPDM rubber-based elastomer waterproofing membrane. It is recommended for any type of partition and underground wall, and is a safe, perfectly waterproof protection, which prevents rising damp and absorption of water in the load-bearing walls. It is light and easy to use, adheres easily and reduces the risk of shearing.
Advantages of EPDM levelling course strips

Protects the building from capillary rise coming from the ground

Good water vapour transmission factor
(μ = 32,000)

Adapts to the movements of the building due to the elasticity of the EPDM

Different water vapour permeability’s depending on the role of the facades

Flexirub has developed a complete system to protect façades, windows and walls against water, bad weather, and damp and also to guarantee perfect airtightness.
The waterproofing strips are recommended for all waterproofing finishing work. They are studied and designed to provide perfect air-and water-tightness. Furthermore, the EPDM/butyl strip is particularly suitable for this application, particularly in the context of RT2012. The EPDM and EPDM/butyl waterproofing strips will make it possible to create a real barrier in the façades to:

Water rising by capillarity (levelling course strip)

Water penetration into the building (waterproofing under cladding)

Air entering the structure (tightness of joinery work)

Watertightness under cladding

Levelling course strip

Impermeability of joinery work

Watertightness under cladding
EPDM strips are ideal for incorporating into metal or concrete constructions. The EPDM strips are placed between the metal wall and the cladding (wood, metal, etc.).

Levelling course strip
EPDM levelling course strips are ideal for cutting off rising damp by capillarity and ensuring impermeability to air and wind. In the case of a house with a wood frame, the strip is put in place between the walls of the basement and the sill plate of the wooden structure.

Impermeability of joinery work
When placed around the joinery work the EPDM strips make it possible to guarantee the air- and water-tightness of a construction. Where there is insulation by the exterior, the insulation covers the EPDM strips fixed around the joinery work.

Flexirub offers you a range of professional accessories to facilitate installation, and finishings for the made-to-measure EPDM membranes.

All

Constructions

PROTECTIVE GEOTEXTILE

DRAINAGE LINER

ROOFING VAPOR BARRIER

EPDM CORNER GUARDS

ALUMINIUM RAINWATER DRAIN

ADJUSTABLE ALUMINIUM LEAF GUARD

GALVANIZED STEEL GRAVEL GUARD

EPDM RAINWATER DRAIN

SHAPED ALUMINIUM FLASHING

ALUMINIUM DRIP EDGE FLASHING

FASTENING PROFILE

EPDM MASTIC

DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE

GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT

ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L

EPDM ON EPDM MEMBRANE ADHESIVE - 1 L

INSTALLATION TOOL KIT

REPAIR KIT

SINGLE-USE LIFTING LOOP

ANTI-ROOT BARRIER

WATERPROOF FLANGE COLLAR

PLINTH FOAM

PROTECTIVE COVER FOR CEMENT

PROTECTIVE COVER FOR GYPSUM BOARD

SOFT CONICAL COLLAR EPDM

ANCHOR ACCESSORIES

ALUMINUM ROOF OUTLET

DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING

PVC FEMALE CAP

PVC OVERFLOW WITH 90° BEND

PVC DRAINAGE VALVE

PVC THROUGH WALL CONNECTION

METAL FASTENING CLIPS

METAL RINGS

GEOKIT® Drained and undrained tertre

PVC GEOMEMBRANE 1MM

LDPE FILM 400 µm

SEPARATION GEOGRID

GEOPLUS® SPREADING

THREE-LAYER COEXDALLE

UNDER-PAVING FILM

PROTECTIVE FILM

ANTI-TERMITE FILM

ANTI-TERMITE FILM FACE ADHESIVE

ANTI-RADON FILM DOUBLE-FACE ADHESIVE

CONNECTOR-ANTI-RADON FILM FACE ADHESIVE

MULCHING MAT

GEOTEXTILE FOR EXTERIOR WORK

ANTI-RADON FILM

SUPERIOR ACOUSTIC FOAM

FINISHING PROFILE

MOUNTING KNOBS WITH NAILS AND WASHERS

BASEMENT PROTECTION

PROTECTIVE GEOTEXTILE
This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration.

DRAINAGE LINER
This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration.

It is ideally used as part of the geomembrane waterproofing system. The drainage liner separates two materials and acts as a drain for a fluid or gas even in a high pressure environment and/or with a low gradient. It can replace or add to a gravel filter bed. Requires careful installation: be careful not to crush the filter, avoid countersloping, ensure continuity and make sure the filter is well covered.

ROOFING VAPOR BARRIER
This vapor-barrier film is a synthetic film manufactured by polyethylene granule extrusion. The film is EC certified according to standard NF EN 13984 and has been designed for use in CULTISOL made-to-measure EPDM waterproofing installations. It avoids condensation in the waterproofing materials, in particular in insulation panels.
It is laid down on the flat roof substrate material (concrete, wood or metal). It must be placed on the warm side of the insulation panel. Double-sided adhesive is used to put in place the 10 cm cover and finishings..

EPDM CORNER GUARDS
EPDM membrane corner guards made-to-measure by hot vulcanization.

Used to reinforce the membrane against abrasion and rubbing. Always used with CULTISOL made-to-measure 3D EPDM membranes to ensure roof watertightness.

ALUMINIUM RAINWATER DRAIN
The rainwater drain is made of stamped, folded aluminum. It is specially designed for use with CULTISOL customized EPDM membranes.
Drains are set into the roof material (stone, concrete, wood, or metal)to ensure rainwater runoff from flat roofs. The crimp seal system means it can be easily and securely installed on the spot.

ADJUSTABLE ALUMINIUM LEAF GUARD
This adjustable leaf guard is made of aluminum wire. It is specially designed for use with CULTISOL rainwater downpipes.
They must be positioned over each rainwater downpipe or overflow to avoid clogging by leaves, branches and other rooftop debris. Available in several easy-to-fit diameters.

GALVANIZED STEEL GRAVEL GUARD
This gravel guard is made of galvanized steel. It is specially designed to protect rainwater downpipes against loose dirt and gravel.
They must be positioned over each rainwater downpipe to prevent them being clogged by gravel used as ballast with CULTISOL madeto- measure EPDM membranes.

EPDM RAINWATER DRAIN
The rainwater drain consists of a rigid PVC pipe (or sleeve) and an EPDM membrane flange. The two components are assembled using a special heat welding technique. Supplied in standard 90, 110 and 125 mm dimensions.
Used mainly for roof waterproofing, but can also be used in other waterproofing applications. Cold-sealed with Cultisol EPDM on EPDM adhesive or secure

SHAPED ALUMINIUM FLASHING
The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure CULTISOL made-to-measure EPDM membranes.
The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure FLEXIRUB made-to-measure EPDM membranes.

ALUMINIUM DRIP EDGE FLASHING
Drip edge flashing is shaped by folding a sheet of aluminIum. Specially designed to secure FLEXIRUB made-to-measure EPDM membranes at roof edges.
The drip edge flashing is used to ensure a perfect finish to sealing upstands.
It is secured using screws or hammer fixings every 30 cm in the predrilled

FASTENING PROFILE
The Fastening profile are used to mechanically fix EPDM finishes to the wall. They ensure the watertightness of the solution by blocking the water flowing along the wall. Dimensions: 3,74 cm x 3,05 m (sold by 5)

EPDM MASTIC
Flexirub’s EPDM adhesive is a single-component MS polymer-based moisture cured adhesive. For use as a waterproofing and adhesive agent with EPDM membranes. Will secure any kind of bonding. (Please contact Flexirub’s technical department if in doubt over compatibility with certain specific materials)

Perfect for finishes or for repairing torn or perforated membranes. Multi-purpose adhesive designed to bond with many types of materials: wood, concrete, metal, etc. Before applying, make sure the EPDM surface is clean and free of oil and grease to guarantee perfect bonding. (use only alcohol-based and not petroleum-based cleaning agents). Fiche De Données Sécurité Mastic EPDM

DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
Double-sided butyl adhesive allowing the junction between EPDM membrane and various fixing supports

Used in addition to glues and sealants

Ideal for securing a flexible EPDM collar or for fixing a sealing gauge

Dimensions: Width 25 mm or 50 mm or custom-made

GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
Adhesive based on acrylic resin allowing adhesion of the EPDM membrane on wood and concrete support
• Solvent-free and odorless glue
• Gluing by simple gluing
• Allows repositioning of the membrane

Up to 30 minutes after application Average consumption: 0.25 liters per 1 m² Volume: 2 L pot or 8 L bucket
Fiche De Données Sécurité Colle Membrane EPDM Sur Support Bois-Béton

ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
A synthetic polymer contact adhesive used to fix the EPDM membrane to any surface, such as masonry, wood, metal or other compatible materials. Available in 5-liter cans.

Fiche De Données Sécurité Colle Membrane EPDM Tout Support

EPDM ON EPDM MEMBRANE ADHESIVE - 1 L
A liquid butyl-based adhesive for EPDM membrane to membrane assembly, and to guarantee that the protection remains leak proof. Available in 1-liter cans.

Fiche De Données Sécurité Colle Membrane EPDM Sur EPDM

INSTALLATION TOOL KIT
Kit of installation tools allowing a perfect installation of the membrane and accessories Composed of a pair of scissors, a marking pencil, a brush, a roller, a masking tape, a mastic cartridge and a putty gun.

REPAIR KIT
Kit consisting of a square EPDM membrane, a butyl glue, a mastic cartridge And abrasive paper to allow cleaning before repairing a damaged membrane

SINGLE-USE LIFTING LOOP
Flexirub supplies three types of lifting loop to facilitate movement of the EPDM geomembrane rolls.
Dimensions:
- Maximum working load of 500 kg: 30 mm x 5 m
- Maximum working load of 1000 kg: 60 mm x 5 m
- Maximum working load of 1500 kg: 90 mm x 5 m

ANTI-ROOT BARRIER
The root barrier protects sensitive areas by deflecting roots downwards. The Isofilma root barrier consists of a non-woven, 100% polypropylene fiber geotextile, coated with polypropylene on both sides. This combination creates an extremely strong barrier that is impenetrable to roots whilst guaranteeing healthy development of trees and plantings. Dimensions: 1.40 x 25 m

ADVANTAGES

Exceptionally long-lasting (25 years)

Impact resistant

Light and easy to use

Resistant to bacteria and chemicals

Specific anti-UV treatment

No risk to the environment - product is fully recyclable

WATERPROOF FLANGE COLLAR
The waterproof flange collar is the only 100% waterproof solution on the market. It is composed of two distinct parts: - A first sticker that allows to adjust its drilling, to avoid tearing and to guide the pipe during the installation. - A second part assembled by clamping, consisting of two flanges and a joint.

PLINTH FOAM
The 3 mm skirting foam contributes to the acoustic and thermal insulation of floating floors and floor coverings. The Isofilma skirting foam is produced by non-polluting processes and is totally free of chlorine, emollients, halogens, sulfur, silicones and stabilizers from heavy metals.
Dimensions : 100 mm x 50 m.

ADVANTAGES

Avoids sound bridges and tile cracks

Heatable floor heating

Respects the expansion of the parquet

Two thicknesses available for different performance levels

PROTECTIVE COVER FOR CEMENT
Translucent cover to protect the cement from moisture. Dimensions : 1,25 m (2 x 0,6 m) x 1,70 m.

ADVANTAGE
Allows cement storage outside

PROTECTIVE COVER FOR GYPSUM BOARD
Translucent cover to protect drywall against moisture.
Dimensions: 4 mx 1.8 m or 4.5 mx 1.8 m.

ADVANTAGE
Allows storage of plasterboard outside

SOFT CONICAL COLLAR EPDM
The flexible conical flange is the ideal solution for all connections on variable diameters. It is manufactured from a base and an EPDM sleeve manufactured in a cone with a diameter of 50mm to a diameter of 200mm. The assembly is fully assembled by hot vulcanization

ANCHOR ACCESSORIES
Flexirub offers different accessories to facilitate the anchoring of its membranes. They are classified into two distinct categories: eyelets and fastening rings.

Features:

Stainless steel eyelets: Øint 9 mm or 15 mm or 25 mm
Nickel-plated brass eyelets: Øint 40 mm
"Half-moon" or "triangle" rings: Ø 6 mm x 50 mm

ALUMINUM ROOF OUTLET
The roof outlet is made of stamped, folded aluminum. It is specially designed for use with FLEXIRUB customized EPDM membranes
Overflows are set into the roof material (stone, concrete, wood, or metal) so as to ensure rainwater runoff in case the downpipes cannot cope. The crimp seal system means it can be easily and securely installed on the spot.

DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
Allows to connect the widths of vapor barrier film to each other
• Facilitates the fixation of the film on the support

Format: 60mmx20m

PVC FEMALE CAP
Female-threaded PVC end caps are designed to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
They are used as end caps on CULTISOL EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints.

PVC OVERFLOW WITH 90° BEND
The 90° elbow fittings are threaded at both ends to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
They are used as drain outlet accessories on Flexirub EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints.

PVC DRAINAGE VALVE
PVC-uH valves are simple quarter turn open/shut fittings. Threaded at both ends to allow easy connexion to other pipes. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.

PVC THROUGH WALL CONNECTION
Allows the formation of a tight connection between the filling elements (tap, supply pipe, etc.) and the interior of the flexible tank
• Consists of a threaded spindle, two nuts and two EPDM flat seals

METAL FASTENING CLIPS
Permit secure attachment of ground protection geotextile

METAL RINGS
Stainless steel for excellent resistance to corrosion and aging
• Made by hot forging for superior mechanical strength

Format: Triangle and Half Moon

GEOKIT® Drained and undrained tertre
This GeoKit® contains the following components:

1 separation geogrid
1 separation geotextile 150 g / m²
1 LDPE film 0.4 mm (in the case of the drained mound)
1 watertight flange collar (in the case of the drained mound)
1 adhesive collar (in the case of the drained mound)

PVC GEOMEMBRANE 1MM
Complies with NF DTU 64.1
• Allows waterproofing of drained sand filters

LDPE FILM 400 µm
This black 0.4 mm LDPE coextruded film offers very good mechanical resistance properties, thanks to its triple-layer technology. Rotproof and waterproof.
Black LDPE 400 μm film is used in self-standing wastewater treatment systems, in particular to ensure watertightness in watertight drained sand filter, raised bed or compact sand filter systems. It can also be used in undrained sand filter systems, for lateral watertightness.

SEPARATION GEOGRID
The separation geogrid, or filtration grid, is manufactured from High- Density Polyethylene (HDPE). The material is highly-resilient while maintaining a degree of flexibility. For optimal efficiency, the geogrid must be used with a separation and filtration geotextile to retain the finest particles and avoid clogging.

The geogrid is mainyl used in waste-water treatment installations. It is used in particular to separate different granular layers. It is mandatory with a sand filter or other artifical soil filtration systems.

GEOPLUS® SPREADING
Allows separation of gravel and topsoil in trenches

THREE-LAYER COEXDALLE
• Prevents moisture rise by capillarities
• Complies with DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards

Three-layer polyethylene three-layer underpadding film
• Prevents moisture rise by capillarity
• Conforms to DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards

UNDER-PAVING FILM
Film under translucent plowing, single-layer polyethylene
• Prevents moisture rise by capillarity
• Conforms to DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards

Format : 3 m x 66 m - 6 m x 33 m - 3 m x 50 m - 6 m x 25 m - 6 m x 20 m

PROTECTIVE FILM
Protective film made of polyethylene
• Suitable for all types of work
• Easy to install

ANTI-TERMITE FILM
Three layer film with a thickness of 150 μm in polyethylene
• Created a physicochemical barrier against termites
• Non-washable film which prevents any diffusion of active material
• Product certified CTB-P + by the FCBA
• Guaranteed 10 years

Format : 5 m x 33 m

ANTI-TERMITE FILM FACE ADHESIVE
Format : 75 mm x 66 m

ANTI-RADON FILM DOUBLE-FACE ADHESIVE
Format : 19 mm x 20 m

CONNECTOR-ANTI-RADON FILM FACE ADHESIVE
Format : 50 mm x 25 m

MULCHING MAT
Woven polypropylene green mulch fabric
• UV-treated product
• Fastening by staple
• Permeable to water and air

GEOTEXTILE FOR EXTERIOR WORK
Geotextile in nonwoven needlepunched polypropylene 100 g / m²
• Stabilizes the floors before laying a pavement or a terrace
• Allows protection of drainage pipes

ANTI-RADON FILM
Film with a thickness of 200 μm in polyamide
• Created a genuine barrier to radon gas in construction
• Indoor / outdoor concentration ratio of 0.45% versus 68% for a conventional 200 μm polyethylene film

SUPERIOR ACOUSTIC FOAM
Polyethylene foam with reticulated closed cells
• Allows acoustic and thermal insulation
• Compatible with underfloor heating

FINISHING PROFILE
Profile for fixing the underbody protection to the wall

MOUNTING KNOBS WITH NAILS AND WASHERS
Nails and washers for fixing the profile to the underbody protection

BASEMENT PROTECTION
Polyethylene underbody protection
Protects bituminous paint Size: 1 mx 20 m - 1.5 mx 20 m - 2 mx 20 m - 2.5 mx 20 m - 3 mx 20 m

In order to facilitate the implementation of your waterproofing project Flexirub will provide you with its catalogue and a set of technical documents:

BROWSE THE CATALOGUE
Flexirub documentation:
EPDM waterproofing strips

Our team of specialists is available to support you in your project. To enable us to come back to you with a detailed, costed proposal please take the time to complete our information request form.

CONTACT US

Prefabricated EPDM flexible tanks

CONCEPT

ADVANTAGES

OUR RANGE

ACCESSORIES

DOCUMENTATION

As a result of its expertise in the waterproofing field and its investment in Research and Development Flexirub has been able to design the first range of flexible tanks in EPDM.

The new generation of ultra-resistant flexible tanks
In order to respond to the problems of collection and storage of rainwater Flexirub has taken advantage of its complete mastery of elastomers to create the first flexible tanks based on EPDM membranes.

EPDM is a material with remarkable qualities. It enables Flexirub flexible tanks to combine solidity, lightness and elasticity whilst benefiting from an exceptional service life.

EPDM flexible tanks may be used in agriculture, building and public works, or industry and also in the residential field for collecting rainwater, watering gardens, etc.

EPDM flexible tanks are a real revolution on the market and enable you to store and conserve liquids over the long term.

Residential

Collection of rainwater

Watering

Domestic use

Caravanning/Camping

Agriculture

Irrigation

Farming

Washing agricultural machinery

Liquid fertiliser

Building and Public Works

Buffer storage on a work site

Washing equipment

Site facilities

Washing roads

Industry

Buffer storage

Industrial procedures

Cleaning of equipment and premises

Industrial tank

Other applications

Humanitarian

Animal housing

Caravanning

Mobile homes

Installation OF A 3D EPDM flexible tank

Why should you choose an EPDM flexible tank prefabricated to measure in the factory and ready-to-install?

2 EPDM ranges for extreme solidity and resistance

Reinforced EPDM (polyester grid and EPDM) for extreme solidity, perfect self-holding and limited distortion of the tanks

EPDM for greater lightness and better elasticity of the tanks

The EPDM flexible tank is assembled in the factory by hot vulcanisation providing extreme resistance

Indestructible welding by hot vulcanisation

Service life of more than 50 years for the EPDM material

Perfect resistance to bad weather, UV and extreme temperatures (- 40°C to + 120°C)

Watertight storage preventing any pollution, evaporation and odour from the contents

Simple and fast to implement for temporary or permanent use

Ready to install

Lightness of the tank facilitates transport

Interior or exterior installation

Temporary or permanent use

Flexirub has developed a wide range of flexible tanks in EPDM or reinforced EPDM so as to meet all requirements.

Two performance levels
Flexirub has developed two additional types of flexible tank which meet distinct requirements.

Reinforced EPDM
giving extreme solidity and ideal self-holding. These flexible tanks, composed of a polyester grid surrounded by two thickness of EPDM have the advantages of different aesthetics and limited distortion.

Single-ply EPDM
for perfect waterproofing and better elasticity. These tanks only have a single thickness of EPDM, which makes them very flexible and therefore gain slightly in volume.

A wide diversity of volumes or made-to-measure
25 references of EPDM flexible tanks have been designed to meet all requirements with volumes from 250 to 60,000 litres.

The small volumes are perfect for individuals wanting to collect rainwater for domestic use or to water their gardens.

The larger volumes will be more suitable for industrial use (storage, cleaning) or for agriculture (irrigation, rearing of livestock)

A packaged solution
Flexirub offers a packaged solution made up of a flexible tank in EPDM or reinforced EPDM accompanied by various accessories:

A protective geotextile

A PVC female (outlet) cap

A PVC drain valve

An overflow elbow

A roll of Teflon

Fixing staples

Flexirub offers you a range of professional accessories to facilitate installation, and finishings for the made-to-measure EPDM membranes.

All

Constructions

PROTECTIVE GEOTEXTILE

DRAINAGE LINER

ROOFING VAPOR BARRIER

EPDM CORNER GUARDS

ALUMINIUM RAINWATER DRAIN

ADJUSTABLE ALUMINIUM LEAF GUARD

GALVANIZED STEEL GRAVEL GUARD

EPDM RAINWATER DRAIN

SHAPED ALUMINIUM FLASHING

ALUMINIUM DRIP EDGE FLASHING

FASTENING PROFILE

EPDM MASTIC

DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE

GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT

ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L

EPDM ON EPDM MEMBRANE ADHESIVE - 1 L

INSTALLATION TOOL KIT

REPAIR KIT

SINGLE-USE LIFTING LOOP

ANTI-ROOT BARRIER

WATERPROOF FLANGE COLLAR

PLINTH FOAM

PROTECTIVE COVER FOR CEMENT

PROTECTIVE COVER FOR GYPSUM BOARD

SOFT CONICAL COLLAR EPDM

ANCHOR ACCESSORIES

ALUMINUM ROOF OUTLET

DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING

PVC FEMALE CAP

PVC OVERFLOW WITH 90° BEND

PVC DRAINAGE VALVE

PVC THROUGH WALL CONNECTION

METAL FASTENING CLIPS

METAL RINGS

GEOKIT® Drained and undrained tertre

PVC GEOMEMBRANE 1MM

LDPE FILM 400 µm

SEPARATION GEOGRID

GEOPLUS® SPREADING

THREE-LAYER COEXDALLE

UNDER-PAVING FILM

PROTECTIVE FILM

ANTI-TERMITE FILM

ANTI-TERMITE FILM FACE ADHESIVE

ANTI-RADON FILM DOUBLE-FACE ADHESIVE

CONNECTOR-ANTI-RADON FILM FACE ADHESIVE

MULCHING MAT

GEOTEXTILE FOR EXTERIOR WORK

ANTI-RADON FILM

SUPERIOR ACOUSTIC FOAM

FINISHING PROFILE

MOUNTING KNOBS WITH NAILS AND WASHERS

BASEMENT PROTECTION

PROTECTIVE GEOTEXTILE
This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration.

DRAINAGE LINER
This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration.

It is ideally used as part of the geomembrane waterproofing system. The drainage liner separates two materials and acts as a drain for a fluid or gas even in a high pressure environment and/or with a low gradient. It can replace or add to a gravel filter bed. Requires careful installation: be careful not to crush the filter, avoid countersloping, ensure continuity and make sure the filter is well covered.

ROOFING VAPOR BARRIER
This vapor-barrier film is a synthetic film manufactured by polyethylene granule extrusion. The film is EC certified according to standard NF EN 13984 and has been designed for use in CULTISOL made-to-measure EPDM waterproofing installations. It avoids condensation in the waterproofing materials, in particular in insulation panels.
It is laid down on the flat roof substrate material (concrete, wood or metal). It must be placed on the warm side of the insulation panel. Double-sided adhesive is used to put in place the 10 cm cover and finishings..

EPDM CORNER GUARDS
EPDM membrane corner guards made-to-measure by hot vulcanization.

Used to reinforce the membrane against abrasion and rubbing. Always used with CULTISOL made-to-measure 3D EPDM membranes to ensure roof watertightness.

ALUMINIUM RAINWATER DRAIN
The rainwater drain is made of stamped, folded aluminum. It is specially designed for use with CULTISOL customized EPDM membranes.
Drains are set into the roof material (stone, concrete, wood, or metal)to ensure rainwater runoff from flat roofs. The crimp seal system means it can be easily and securely installed on the spot.

ADJUSTABLE ALUMINIUM LEAF GUARD
This adjustable leaf guard is made of aluminum wire. It is specially designed for use with CULTISOL rainwater downpipes.
They must be positioned over each rainwater downpipe or overflow to avoid clogging by leaves, branches and other rooftop debris. Available in several easy-to-fit diameters.

GALVANIZED STEEL GRAVEL GUARD
This gravel guard is made of galvanized steel. It is specially designed to protect rainwater downpipes against loose dirt and gravel.
They must be positioned over each rainwater downpipe to prevent them being clogged by gravel used as ballast with CULTISOL madeto- measure EPDM membranes.

EPDM RAINWATER DRAIN
The rainwater drain consists of a rigid PVC pipe (or sleeve) and an EPDM membrane flange. The two components are assembled using a special heat welding technique. Supplied in standard 90, 110 and 125 mm dimensions.
Used mainly for roof waterproofing, but can also be used in other waterproofing applications. Cold-sealed with Cultisol EPDM on EPDM adhesive or secure

SHAPED ALUMINIUM FLASHING
The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure CULTISOL made-to-measure EPDM membranes.
The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure FLEXIRUB made-to-measure EPDM membranes.

ALUMINIUM DRIP EDGE FLASHING
Drip edge flashing is shaped by folding a sheet of aluminIum. Specially designed to secure FLEXIRUB made-to-measure EPDM membranes at roof edges.
The drip edge flashing is used to ensure a perfect finish to sealing upstands.
It is secured using screws or hammer fixings every 30 cm in the predrilled

FASTENING PROFILE
The Fastening profile are used to mechanically fix EPDM finishes to the wall. They ensure the watertightness of the solution by blocking the water flowing along the wall. Dimensions: 3,74 cm x 3,05 m (sold by 5)

EPDM MASTIC
Flexirub’s EPDM adhesive is a single-component MS polymer-based moisture cured adhesive. For use as a waterproofing and adhesive agent with EPDM membranes. Will secure any kind of bonding. (Please contact Flexirub’s technical department if in doubt over compatibility with certain specific materials)

Perfect for finishes or for repairing torn or perforated membranes. Multi-purpose adhesive designed to bond with many types of materials: wood, concrete, metal, etc. Before applying, make sure the EPDM surface is clean and free of oil and grease to guarantee perfect bonding. (use only alcohol-based and not petroleum-based cleaning agents). Fiche De Données Sécurité Mastic EPDM

DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
Double-sided butyl adhesive allowing the junction between EPDM membrane and various fixing supports

Used in addition to glues and sealants

Ideal for securing a flexible EPDM collar or for fixing a sealing gauge

Dimensions: Width 25 mm or 50 mm or custom-made

GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
Adhesive based on acrylic resin allowing adhesion of the EPDM membrane on wood and concrete support
• Solvent-free and odorless glue
• Gluing by simple gluing
• Allows repositioning of the membrane

Up to 30 minutes after application Average consumption: 0.25 liters per 1 m² Volume: 2 L pot or 8 L bucket
Fiche De Données Sécurité Colle Membrane EPDM Sur Support Bois-Béton

ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
A synthetic polymer contact adhesive used to fix the EPDM membrane to any surface, such as masonry, wood, metal or other compatible materials. Available in 5-liter cans.

Fiche De Données Sécurité Colle Membrane EPDM Tout Support

EPDM ON EPDM MEMBRANE ADHESIVE - 1 L
A liquid butyl-based adhesive for EPDM membrane to membrane assembly, and to guarantee that the protection remains leak proof. Available in 1-liter cans.

Fiche De Données Sécurité Colle Membrane EPDM Sur EPDM

INSTALLATION TOOL KIT
Kit of installation tools allowing a perfect installation of the membrane and accessories Composed of a pair of scissors, a marking pencil, a brush, a roller, a masking tape, a mastic cartridge and a putty gun.

REPAIR KIT
Kit consisting of a square EPDM membrane, a butyl glue, a mastic cartridge And abrasive paper to allow cleaning before repairing a damaged membrane

SINGLE-USE LIFTING LOOP
Flexirub supplies three types of lifting loop to facilitate movement of the EPDM geomembrane rolls.
Dimensions:
- Maximum working load of 500 kg: 30 mm x 5 m
- Maximum working load of 1000 kg: 60 mm x 5 m
- Maximum working load of 1500 kg: 90 mm x 5 m

ANTI-ROOT BARRIER
The root barrier protects sensitive areas by deflecting roots downwards. The Isofilma root barrier consists of a non-woven, 100% polypropylene fiber geotextile, coated with polypropylene on both sides. This combination creates an extremely strong barrier that is impenetrable to roots whilst guaranteeing healthy development of trees and plantings. Dimensions: 1.40 x 25 m

ADVANTAGES

Exceptionally long-lasting (25 years)

Impact resistant

Light and easy to use

Resistant to bacteria and chemicals

Specific anti-UV treatment

No risk to the environment - product is fully recyclable

WATERPROOF FLANGE COLLAR
The waterproof flange collar is the only 100% waterproof solution on the market. It is composed of two distinct parts: - A first sticker that allows to adjust its drilling, to avoid tearing and to guide the pipe during the installation. - A second part assembled by clamping, consisting of two flanges and a joint.

PLINTH FOAM
The 3 mm skirting foam contributes to the acoustic and thermal insulation of floating floors and floor coverings. The Isofilma skirting foam is produced by non-polluting processes and is totally free of chlorine, emollients, halogens, sulfur, silicones and stabilizers from heavy metals.
Dimensions : 100 mm x 50 m.

ADVANTAGES

Avoids sound bridges and tile cracks

Heatable floor heating

Respects the expansion of the parquet

Two thicknesses available for different performance levels

PROTECTIVE COVER FOR CEMENT
Translucent cover to protect the cement from moisture. Dimensions : 1,25 m (2 x 0,6 m) x 1,70 m.

ADVANTAGE
Allows cement storage outside

PROTECTIVE COVER FOR GYPSUM BOARD
Translucent cover to protect drywall against moisture.
Dimensions: 4 mx 1.8 m or 4.5 mx 1.8 m.

ADVANTAGE
Allows storage of plasterboard outside

SOFT CONICAL COLLAR EPDM
The flexible conical flange is the ideal solution for all connections on variable diameters. It is manufactured from a base and an EPDM sleeve manufactured in a cone with a diameter of 50mm to a diameter of 200mm. The assembly is fully assembled by hot vulcanization

ANCHOR ACCESSORIES
Flexirub offers different accessories to facilitate the anchoring of its membranes. They are classified into two distinct categories: eyelets and fastening rings.

Features:

Stainless steel eyelets: Øint 9 mm or 15 mm or 25 mm
Nickel-plated brass eyelets: Øint 40 mm
"Half-moon" or "triangle" rings: Ø 6 mm x 50 mm

ALUMINUM ROOF OUTLET
The roof outlet is made of stamped, folded aluminum. It is specially designed for use with FLEXIRUB customized EPDM membranes
Overflows are set into the roof material (stone, concrete, wood, or metal) so as to ensure rainwater runoff in case the downpipes cannot cope. The crimp seal system means it can be easily and securely installed on the spot.

DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
Allows to connect the widths of vapor barrier film to each other
• Facilitates the fixation of the film on the support

Format: 60mmx20m

PVC FEMALE CAP
Female-threaded PVC end caps are designed to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
They are used as end caps on CULTISOL EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints.

PVC OVERFLOW WITH 90° BEND
The 90° elbow fittings are threaded at both ends to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
They are used as drain outlet accessories on Flexirub EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints.

PVC DRAINAGE VALVE
PVC-uH valves are simple quarter turn open/shut fittings. Threaded at both ends to allow easy connexion to other pipes. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.

PVC THROUGH WALL CONNECTION
Allows the formation of a tight connection between the filling elements (tap, supply pipe, etc.) and the interior of the flexible tank
• Consists of a threaded spindle, two nuts and two EPDM flat seals

METAL FASTENING CLIPS
Permit secure attachment of ground protection geotextile

METAL RINGS
Stainless steel for excellent resistance to corrosion and aging
• Made by hot forging for superior mechanical strength

Format: Triangle and Half Moon

GEOKIT® Drained and undrained tertre
This GeoKit® contains the following components:

1 separation geogrid
1 separation geotextile 150 g / m²
1 LDPE film 0.4 mm (in the case of the drained mound)
1 watertight flange collar (in the case of the drained mound)
1 adhesive collar (in the case of the drained mound)

PVC GEOMEMBRANE 1MM
Complies with NF DTU 64.1
• Allows waterproofing of drained sand filters

LDPE FILM 400 µm
This black 0.4 mm LDPE coextruded film offers very good mechanical resistance properties, thanks to its triple-layer technology. Rotproof and waterproof.
Black LDPE 400 μm film is used in self-standing wastewater treatment systems, in particular to ensure watertightness in watertight drained sand filter, raised bed or compact sand filter systems. It can also be used in undrained sand filter systems, for lateral watertightness.

SEPARATION GEOGRID
The separation geogrid, or filtration grid, is manufactured from High- Density Polyethylene (HDPE). The material is highly-resilient while maintaining a degree of flexibility. For optimal efficiency, the geogrid must be used with a separation and filtration geotextile to retain the finest particles and avoid clogging.

The geogrid is mainyl used in waste-water treatment installations. It is used in particular to separate different granular layers. It is mandatory with a sand filter or other artifical soil filtration systems.

GEOPLUS® SPREADING
Allows separation of gravel and topsoil in trenches

THREE-LAYER COEXDALLE
• Prevents moisture rise by capillarities
• Complies with DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards

Three-layer polyethylene three-layer underpadding film
• Prevents moisture rise by capillarity
• Conforms to DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards

UNDER-PAVING FILM
Film under translucent plowing, single-layer polyethylene
• Prevents moisture rise by capillarity
• Conforms to DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards

Format : 3 m x 66 m - 6 m x 33 m - 3 m x 50 m - 6 m x 25 m - 6 m x 20 m

PROTECTIVE FILM
Protective film made of polyethylene
• Suitable for all types of work
• Easy to install

ANTI-TERMITE FILM
Three layer film with a thickness of 150 μm in polyethylene
• Created a physicochemical barrier against termites
• Non-washable film which prevents any diffusion of active material
• Product certified CTB-P + by the FCBA
• Guaranteed 10 years

Format : 5 m x 33 m

ANTI-TERMITE FILM FACE ADHESIVE
Format : 75 mm x 66 m

ANTI-RADON FILM DOUBLE-FACE ADHESIVE
Format : 19 mm x 20 m

CONNECTOR-ANTI-RADON FILM FACE ADHESIVE
Format : 50 mm x 25 m

MULCHING MAT
Woven polypropylene green mulch fabric
• UV-treated product
• Fastening by staple
• Permeable to water and air

GEOTEXTILE FOR EXTERIOR WORK
Geotextile in nonwoven needlepunched polypropylene 100 g / m²
• Stabilizes the floors before laying a pavement or a terrace
• Allows protection of drainage pipes

ANTI-RADON FILM
Film with a thickness of 200 μm in polyamide
• Created a genuine barrier to radon gas in construction
• Indoor / outdoor concentration ratio of 0.45% versus 68% for a conventional 200 μm polyethylene film

SUPERIOR ACOUSTIC FOAM
Polyethylene foam with reticulated closed cells
• Allows acoustic and thermal insulation
• Compatible with underfloor heating

FINISHING PROFILE
Profile for fixing the underbody protection to the wall

MOUNTING KNOBS WITH NAILS AND WASHERS
Nails and washers for fixing the profile to the underbody protection

BASEMENT PROTECTION
Polyethylene underbody protection
Protects bituminous paint Size: 1 mx 20 m - 1.5 mx 20 m - 2 mx 20 m - 2.5 mx 20 m - 3 mx 20 m

In order to facilitate the implementation of your waterproofing project Flexirub will provide you with its catalogue and a set of technical documents:

BROWSE THE CATALOGUE
Flexirub documentation:
EPDM flexible tanks

Our team of specialists is available to support you in your project. To enable us to come back to you with a detailed, costed proposal please take the time to complete our information request form.

REQUEST YOUR ESTIMATE