Find out about the EPDM waterproofing geomembrane
prefabricated in the factory by Flexirub!

Waterproofing of tanks and basins

  • Why should you choose an EPDM geomembrane prefabricated to measure in the factory and ready-to-install?

    The ready-to-install EPDM 2D or 3D sealing membrane is manufactured to your measurements in the factory

    The ready-to-install EPDM 2D or 3D sealing membrane is manufactured to your measurements in the factory

    •  A turnkey solution in a single piece of up to 2000 m² (2D) and 500 m² (3D) corresponding to the precise dimensions and shapes of each project
    • The piece is manufactured in the factory in a clean environment and makes the achievement of a high quality level possible
    The EPDM geomembrane is assembled in the factory by hot vulcanisation providing extreme resistance

    The EPDM geomembrane is assembled in the factory by hot vulcanisation providing extreme resistance

    •   Maximum solidity of the welds due to the hot vulcanisation
    •   Excellent mechanical resistance (traction, elasticity, static puncture)
    •   Waterproofing piece guaranteed for 10 years
    •   Service life of more than 50 years for the EPDM material
    •   Perfect resistance to UV and extreme temperatures (- 40°C to + 120°C)
    An economical solution that is more environmentally friendly

    An economical solution that is more environmentally friendly

    •   Greatly reduced implementation costs as a result of the prefabrication
    •   Significantly lower labour costs
    •   No trimming or material loss
    •   Maximum longevity of the waterproofing
    •   Synthetic membrane that is more ecological than bitumen paints
    Simple and quick to use in a smaller team as it is a ready-to-install solution

    Simple and quick to use in a smaller team as it is a ready-to-install solution

    • No welding on site
    • Smaller installation team
    • On average installation time divided by 4 compared with traditional solutions that need welding on siter
    Fixing system by anchoring or bonding to optimise the installation time for the geomembrane
    Fixing system by anchoring or bonding to optimise the installation time for the geomembrane
    •   Fixing by anchoring or bonding
    •   Simplicity of finishes with a complete range of accessories and tools
    The EPDM geomembrane is fixed in complete safety, without on-site welding
    The EPDM geomembrane is fixed in complete safety, without on-site welding
    •   No flame welding or hot air soldering irons on the work site
    •   No risk of fire or burns
    •   No fumes
    •   No odour
  • As a result of its policy of innovation, Flexirub is asserting itself as a true specialist in sealing solutions for tanks and basins.
    Etancheite Bassin Technique
    Etancheite Bassin Agrement
    Etancheite Bassin Agrement
    From technical pools to decorative pools, Flexirub adapts to your projects
    Flexirub designs and manufactures sealing systems for all types of tanks, basins and pools for technical use (fire storage tank, reservoir, agricultural basin, etc.) or decorative use in either EPDM or PVC. These pieces are of very high quality and are suitable for all types of tank or basin however complex the construction.
    The company now designs and manufactures made-to-measure single sealing pieces in 3D, suitable for all shapes of tank or basin.
    This offer has become possible because of the matchless Flexirub manufacturing technology:
    the production of made to measure 3D geomembranes.
    Each piece produced can be configured on the principle of a 3 dimensional shape, corresponding to the exact dimensions and shapes of projects, thus facilitating use whilst optimising the quality of the aesthetic appearance.
  • Flexirub offers a range of sealing solutions for technical basins and ornamental ponds.
    pose etancheite bassin agrementpose etancheite bassin agrement
    EPDM 3D geomembrane

    It may contain treated water, run-off water or even sea water.

    The Flexirub EPDM geomembrane in three dimensions is manufactured by a hot vulcanisation procedure in a single piece, however complex the construction. This makes it possible for it to adapt perfectly to various shapes of basin.
    The applications
    for the made-to-measure EPDM 3D geomembrane
    • Rainwater storage: fire storage tank, retention basin, storm water basin.
    • Construction: artificial lake, ornamental pond, lake, river. waterfall.
    • Environment: ponding, water collection, biogas.
    • Agriculture: slurry pit, irrigation canal and basin, fish pond.
    pose etancheite bassin techniquepose etancheite bassin technique
    EPDM 2D geomembrane

    Perfectly adapted
    to simple waterproofing projects.

    It is manufactured to measure in our factories by hot vulcanisation in a single piece up to 2000 m² whilst benefiting from regular quality control.
    Applications
    for the EPDM 2D geomembrane
    • Rainwater storage: fire storage tank, retention basin, storm water basin.
    • Construction: artificial lake, ornamental pond, lake, river. waterfall.
    • Environment: ponding, water collection, biogas.
    • Agriculture: slurry pit, irrigation canal and basin, fish pond.
    bassin_pvc_2D
    PVC 2D geomembrane

    Excellent value for money. It can contain numerous liquids apart from drinking water and hydrocarbons.

    This geomembrane is manufactured by lamination. It has very good mechanical properties and is very resistant to perforation, roots as well as acids, bases, and solvents.
    Applications
    for the PVC 2D geomembrane
    • Rainwater storage: fire storage tank, retention basin, storm water basin.
    • Construction: artificial lake, ornamental pond, lake, river. waterfall.
  • Flexirub offers you a range of professional accessories to facilitate installation, and finishings for the made-to-measure EPDM membranes.
    PROTECTIVE GEOTEXTILE
    PROTECTIVE GEOTEXTILE
    DRAINAGE LINER
    DRAINAGE LINER
    ROOFING VAPOR BARRIER
    ROOFING VAPOR BARRIER
    EPDM CORNER GUARDS
    EPDM CORNER GUARDS
    ALUMINIUM RAINWATER DRAIN
    ALUMINIUM RAINWATER DRAIN
    ADJUSTABLE ALUMINIUM LEAF GUARD
    ADJUSTABLE ALUMINIUM LEAF GUARD
    GALVANIZED STEEL GRAVEL GUARD
    GALVANIZED STEEL GRAVEL GUARD
    EPDM RAINWATER DRAIN
    EPDM RAINWATER DRAIN
    SHAPED ALUMINIUM FLASHING
    SHAPED ALUMINIUM FLASHING
    ALUMINIUM DRIP EDGE FLASHING
    ALUMINIUM DRIP EDGE FLASHING
    FASTENING PROFILE
    FASTENING PROFILE
    EPDM MASTIC
    EPDM MASTIC
    DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
    DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
    GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
    GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
    ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
    ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
    EPDM ON EPDM MEMBRANE ADHESIVE - 1 L
    EPDM ON EPDM MEMBRANE ADHESIVE - 1 L
    INSTALLATION TOOL KIT
    INSTALLATION TOOL KIT
    REPAIR KIT
    REPAIR KIT
    SINGLE-USE LIFTING LOOP
    SINGLE-USE LIFTING LOOP
    ANTI-ROOT BARRIER
    ANTI-ROOT BARRIER
    WATERPROOF FLANGE COLLAR
    WATERPROOF FLANGE COLLAR
    PLINTH FOAM
    PLINTH FOAM
    PROTECTIVE COVER FOR CEMENT
    PROTECTIVE COVER FOR CEMENT
    PROTECTIVE COVER FOR GYPSUM BOARD
    PROTECTIVE COVER FOR GYPSUM BOARD
    SOFT CONICAL COLLAR EPDM
    SOFT CONICAL COLLAR EPDM
    ANCHOR ACCESSORIES
    ANCHOR ACCESSORIES
    ALUMINUM ROOF OUTLET
    ALUMINUM ROOF OUTLET
    DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
    DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
    PVC FEMALE CAP
    PVC FEMALE CAP
    PVC OVERFLOW WITH 90° BEND
    PVC OVERFLOW WITH 90° BEND
    PVC DRAINAGE VALVE
    PVC DRAINAGE VALVE
    PVC THROUGH WALL CONNECTION
    PVC THROUGH WALL CONNECTION
    METAL FASTENING CLIPS
    METAL FASTENING CLIPS
    METAL RINGS
    METAL RINGS
    GEOKIT® Drained and undrained tertre
    GEOKIT® Drained and undrained tertre
    PVC GEOMEMBRANE 1MM
    PVC GEOMEMBRANE 1MM
    LDPE FILM 400 µm
    LDPE FILM 400 µm
    SEPARATION GEOGRID
    SEPARATION GEOGRID
    GEOPLUS® SPREADING
    GEOPLUS® SPREADING
    THREE-LAYER COEXDALLE
    THREE-LAYER COEXDALLE
    UNDER-PAVING FILM
    UNDER-PAVING FILM
    PROTECTIVE FILM
    PROTECTIVE FILM
    ANTI-TERMITE FILM
    ANTI-TERMITE FILM
    ANTI-TERMITE FILM FACE ADHESIVE
    ANTI-TERMITE FILM FACE ADHESIVE
    ANTI-RADON FILM DOUBLE-FACE ADHESIVE
    ANTI-RADON FILM DOUBLE-FACE ADHESIVE
    CONNECTOR-ANTI-RADON FILM FACE ADHESIVE
    CONNECTOR-ANTI-RADON FILM FACE ADHESIVE
    MULCHING MAT
    MULCHING MAT
    GEOTEXTILE FOR EXTERIOR WORK
    GEOTEXTILE FOR EXTERIOR WORK
    ANTI-RADON FILM
    ANTI-RADON FILM
    SUPERIOR ACOUSTIC FOAM
    SUPERIOR ACOUSTIC FOAM
    FINISHING PROFILE
    FINISHING PROFILE
    MOUNTING KNOBS WITH NAILS AND WASHERS
    MOUNTING KNOBS WITH NAILS AND WASHERS
    BASEMENT PROTECTION
    BASEMENT PROTECTION
    • PROTECTIVE GEOTEXTILE
    • DRAINAGE LINER
    • ROOFING VAPOR BARRIER
    • EPDM CORNER GUARDS
    • ALUMINIUM RAINWATER DRAIN
    • ADJUSTABLE ALUMINIUM LEAF GUARD
    • GALVANIZED STEEL GRAVEL GUARD
    • EPDM RAINWATER DRAIN
    • SHAPED ALUMINIUM FLASHING
    • ALUMINIUM DRIP EDGE FLASHING
    • FASTENING PROFILE
    • EPDM MASTIC
    • DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
    • GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
    • ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
    • EPDM ON EPDM MEMBRANE ADHESIVE - 1 L
    • INSTALLATION TOOL KIT
    • REPAIR KIT
    • SINGLE-USE LIFTING LOOP
    • ANTI-ROOT BARRIER
    • WATERPROOF FLANGE COLLAR
    • PLINTH FOAM
    • PROTECTIVE COVER FOR CEMENT
    • PROTECTIVE COVER FOR GYPSUM BOARD
    • SOFT CONICAL COLLAR EPDM
    • ANCHOR ACCESSORIES
    • ALUMINUM ROOF OUTLET
    • DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
    • PVC FEMALE CAP
    • PVC OVERFLOW WITH 90° BEND
    • PVC DRAINAGE VALVE
    • PVC THROUGH WALL CONNECTION
    • METAL FASTENING CLIPS
    • METAL RINGS
    • GEOKIT® Drained and undrained tertre
    • PVC GEOMEMBRANE 1MM
    • LDPE FILM 400 µm
    • SEPARATION GEOGRID
    • GEOPLUS® SPREADING
    • THREE-LAYER COEXDALLE
    • UNDER-PAVING FILM
    • PROTECTIVE FILM
    • ANTI-TERMITE FILM
    • ANTI-TERMITE FILM FACE ADHESIVE
    • ANTI-RADON FILM DOUBLE-FACE ADHESIVE
    • CONNECTOR-ANTI-RADON FILM FACE ADHESIVE
    • MULCHING MAT
    • GEOTEXTILE FOR EXTERIOR WORK
    • ANTI-RADON FILM
    • SUPERIOR ACOUSTIC FOAM
    • FINISHING PROFILE
    • MOUNTING KNOBS WITH NAILS AND WASHERS
    • BASEMENT PROTECTION
    • PROTECTIVE GEOTEXTILE
      This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration.
    • DRAINAGE LINER
      This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration.

      It is ideally used as part of the geomembrane waterproofing system. The drainage liner separates two materials and acts as a drain for a fluid or gas even in a high pressure environment and/or with a low gradient. It can replace or add to a gravel filter bed. Requires careful installation: be careful not to crush the filter, avoid countersloping, ensure continuity and make sure the filter is well covered.
    • ROOFING VAPOR BARRIER
      This vapor-barrier film is a synthetic film manufactured by polyethylene granule extrusion. The film is EC certified according to standard NF EN 13984 and has been designed for use in CULTISOL made-to-measure EPDM waterproofing installations. It avoids condensation in the waterproofing materials, in particular in insulation panels.
      It is laid down on the flat roof substrate material (concrete, wood or metal). It must be placed on the warm side of the insulation panel. Double-sided adhesive is used to put in place the 10 cm cover and finishings..
    • EPDM CORNER GUARDS
      EPDM membrane corner guards made-to-measure by hot vulcanization.

      Used to reinforce the membrane against abrasion and rubbing. Always used with CULTISOL made-to-measure 3D EPDM membranes to ensure roof watertightness.
    • ALUMINIUM RAINWATER DRAIN
      The rainwater drain is made of stamped, folded aluminum. It is specially designed for use with CULTISOL customized EPDM membranes.
      Drains are set into the roof material (stone, concrete, wood, or metal)to ensure rainwater runoff from flat roofs. The crimp seal system means it can be easily and securely installed on the spot.
    • ADJUSTABLE ALUMINIUM LEAF GUARD
      This adjustable leaf guard is made of aluminum wire. It is specially designed for use with CULTISOL rainwater downpipes.
      They must be positioned over each rainwater downpipe or overflow to avoid clogging by leaves, branches and other rooftop debris. Available in several easy-to-fit diameters.
    • GALVANIZED STEEL GRAVEL GUARD
      This gravel guard is made of galvanized steel. It is specially designed to protect rainwater downpipes against loose dirt and gravel.
      They must be positioned over each rainwater downpipe to prevent them being clogged by gravel used as ballast with CULTISOL madeto- measure EPDM membranes.
    • EPDM RAINWATER DRAIN
      The rainwater drain consists of a rigid PVC pipe (or sleeve) and an EPDM membrane flange. The two components are assembled using a special heat welding technique. Supplied in standard 90, 110 and 125 mm dimensions.
      Used mainly for roof waterproofing, but can also be used in other waterproofing applications. Cold-sealed with Cultisol EPDM on EPDM adhesive or secure
    • SHAPED ALUMINIUM FLASHING
      The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure CULTISOL made-to-measure EPDM membranes.
      The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure FLEXIRUB made-to-measure EPDM membranes.
    • ALUMINIUM DRIP EDGE FLASHING
      Drip edge flashing is shaped by folding a sheet of aluminIum. Specially designed to secure FLEXIRUB made-to-measure EPDM membranes at roof edges.
      The drip edge flashing is used to ensure a perfect finish to sealing upstands.
      It is secured using screws or hammer fixings every 30 cm in the predrilled
    • FASTENING PROFILE
      The Fastening profile are used to mechanically fix EPDM finishes to the wall. They ensure the watertightness of the solution by blocking the water flowing along the wall. Dimensions: 3,74 cm x 3,05 m (sold by 5)
    • EPDM MASTIC
      Flexirub’s EPDM adhesive is a single-component MS polymer-based moisture cured adhesive. For use as a waterproofing and adhesive agent with EPDM membranes. Will secure any kind of bonding. (Please contact Flexirub’s technical department if in doubt over compatibility with certain specific materials)

      Perfect for finishes or for repairing torn or perforated membranes. Multi-purpose adhesive designed to bond with many types of materials: wood, concrete, metal, etc. Before applying, make sure the EPDM surface is clean and free of oil and grease to guarantee perfect bonding. (use only alcohol-based and not petroleum-based cleaning agents). Fiche De Données Sécurité Mastic EPDMFiche De Données Sécurité Mastic EPDM
    • DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
      Double-sided butyl adhesive allowing the junction between EPDM membrane and various fixing supports
      • Used in addition to glues and sealants
      • Ideal for securing a flexible EPDM collar or for fixing a sealing gauge
      Dimensions: Width 25 mm or 50 mm or custom-made
    • GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
      Adhesive based on acrylic resin allowing adhesion of the EPDM membrane on wood and concrete support
      • Solvent-free and odorless glue
      • Gluing by simple gluing
      • Allows repositioning of the membrane

      Up to 30 minutes after application Average consumption: 0.25 liters per 1 m² Volume: 2 L pot or 8 L bucket
      Fiche De Données Sécurité Colle Membrane EPDM Sur Support Bois-BétonFiche De Données Sécurité Colle Membrane EPDM Sur Support Bois-Béton
    • ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
      A synthetic polymer contact adhesive used to fix the EPDM membrane to any surface, such as masonry, wood, metal or other compatible materials. Available in 5-liter cans.

      Fiche De Données Sécurité Colle Membrane EPDM Tout SupportFiche De Données Sécurité Colle Membrane EPDM Tout Support
    • EPDM ON EPDM MEMBRANE ADHESIVE - 1 L
      A liquid butyl-based adhesive for EPDM membrane to membrane assembly, and to guarantee that the protection remains leak proof. Available in 1-liter cans.

      Fiche De Données Sécurité Colle Membrane EPDM Sur EPDMFiche De Données Sécurité Colle Membrane EPDM Sur EPDM
    • INSTALLATION TOOL KIT
      Kit of installation tools allowing a perfect installation of the membrane and accessories Composed of a pair of scissors, a marking pencil, a brush, a roller, a masking tape, a mastic cartridge and a putty gun.
    • REPAIR KIT
      Kit consisting of a square EPDM membrane, a butyl glue, a mastic cartridge And abrasive paper to allow cleaning before repairing a damaged membrane
    • SINGLE-USE LIFTING LOOP
      Flexirub supplies three types of lifting loop to facilitate movement of the EPDM geomembrane rolls.
      Dimensions:
      - Maximum working load of 500 kg: 30 mm x 5 m
      - Maximum working load of 1000 kg: 60 mm x 5 m
      - Maximum working load of 1500 kg: 90 mm x 5 m
    • ANTI-ROOT BARRIER
      The root barrier protects sensitive areas by deflecting roots downwards. The Isofilma root barrier consists of a non-woven, 100% polypropylene fiber geotextile, coated with polypropylene on both sides. This combination creates an extremely strong barrier that is impenetrable to roots whilst guaranteeing healthy development of trees and plantings. Dimensions: 1.40 x 25 m

      ADVANTAGES
      • Exceptionally long-lasting (25 years)
      • Impact resistant
      • Light and easy to use
      • Resistant to bacteria and chemicals
      • Specific anti-UV treatment
      • No risk to the environment - product is fully recyclable
    • WATERPROOF FLANGE COLLAR
      The waterproof flange collar is the only 100% waterproof solution on the market. It is composed of two distinct parts: - A first sticker that allows to adjust its drilling, to avoid tearing and to guide the pipe during the installation. - A second part assembled by clamping, consisting of two flanges and a joint.
    • PLINTH FOAM
      The 3 mm skirting foam contributes to the acoustic and thermal insulation of floating floors and floor coverings. The Isofilma skirting foam is produced by non-polluting processes and is totally free of chlorine, emollients, halogens, sulfur, silicones and stabilizers from heavy metals.
      Dimensions : 100 mm x 50 m.

      ADVANTAGES
      • Avoids sound bridges and tile cracks
      • Heatable floor heating
      • Respects the expansion of the parquet
      • Two thicknesses available for different performance levels
    • PROTECTIVE COVER FOR CEMENT
      Translucent cover to protect the cement from moisture. Dimensions : 1,25 m (2 x 0,6 m) x 1,70 m.

      ADVANTAGE
      Allows cement storage outside
    • PROTECTIVE COVER FOR GYPSUM BOARD
      Translucent cover to protect drywall against moisture.
      Dimensions: 4 mx 1.8 m or 4.5 mx 1.8 m.

      ADVANTAGE
      Allows storage of plasterboard outside
    • SOFT CONICAL COLLAR EPDM
      The flexible conical flange is the ideal solution for all connections on variable diameters. It is manufactured from a base and an EPDM sleeve manufactured in a cone with a diameter of 50mm to a diameter of 200mm. The assembly is fully assembled by hot vulcanization
    • ANCHOR ACCESSORIES
      Flexirub offers different accessories to facilitate the anchoring of its membranes. They are classified into two distinct categories: eyelets and fastening rings.

      Features:
      • Stainless steel eyelets: Øint 9 mm or 15 mm or 25 mm
      • Nickel-plated brass eyelets: Øint 40 mm
      • "Half-moon" or "triangle" rings: Ø 6 mm x 50 mm
    • ALUMINUM ROOF OUTLET
      The roof outlet is made of stamped, folded aluminum. It is specially designed for use with FLEXIRUB customized EPDM membranes
      Overflows are set into the roof material (stone, concrete, wood, or metal) so as to ensure rainwater runoff in case the downpipes cannot cope. The crimp seal system means it can be easily and securely installed on the spot.
    • DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
      Allows to connect the widths of vapor barrier film to each other
      • Facilitates the fixation of the film on the support

      Format: 60mmx20m
    • PVC FEMALE CAP
      Female-threaded PVC end caps are designed to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
      They are used as end caps on CULTISOL EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints.
    • PVC OVERFLOW WITH 90° BEND
      The 90° elbow fittings are threaded at both ends to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
      They are used as drain outlet accessories on Flexirub EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints.
    • PVC DRAINAGE VALVE
      PVC-uH valves are simple quarter turn open/shut fittings. Threaded at both ends to allow easy connexion to other pipes. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
    • PVC THROUGH WALL CONNECTION
      Allows the formation of a tight connection between the filling elements (tap, supply pipe, etc.) and the interior of the flexible tank
      • Consists of a threaded spindle, two nuts and two EPDM flat seals
    • METAL FASTENING CLIPS
      Permit secure attachment of ground protection geotextile
    • METAL RINGS
      Stainless steel for excellent resistance to corrosion and aging
      • Made by hot forging for superior mechanical strength

      Format: Triangle and Half Moon
    • GEOKIT® Drained and undrained tertre
      This GeoKit® contains the following components:
      • 1 separation geogrid
      • 1 separation geotextile 150 g / m²
      • 1 LDPE film 0.4 mm (in the case of the drained mound)
      • 1 watertight flange collar (in the case of the drained mound)
      • 1 adhesive collar (in the case of the drained mound)
    • PVC GEOMEMBRANE 1MM
      Complies with NF DTU 64.1
      • Allows waterproofing of drained sand filters
    • LDPE FILM 400 µm
      This black 0.4 mm LDPE coextruded film offers very good mechanical resistance properties, thanks to its triple-layer technology. Rotproof and waterproof.
      Black LDPE 400 μm film is used in self-standing wastewater treatment systems, in particular to ensure watertightness in watertight drained sand filter, raised bed or compact sand filter systems. It can also be used in undrained sand filter systems, for lateral watertightness.
    • SEPARATION GEOGRID
      The separation geogrid, or filtration grid, is manufactured from High- Density Polyethylene (HDPE). The material is highly-resilient while maintaining a degree of flexibility. For optimal efficiency, the geogrid must be used with a separation and filtration geotextile to retain the finest particles and avoid clogging.

      The geogrid is mainyl used in waste-water treatment installations. It is used in particular to separate different granular layers. It is mandatory with a sand filter or other artifical soil filtration systems.
    • GEOPLUS® SPREADING
      Allows separation of gravel and topsoil in trenches
    • THREE-LAYER COEXDALLE
      • Prevents moisture rise by capillarities
      • Complies with DTU 13.3 relating to pavements
      • Complies with CE and NF EN 13967 standards

      Three-layer polyethylene three-layer underpadding film
      • Prevents moisture rise by capillarity
      • Conforms to DTU 13.3 relating to pavements
      • Complies with CE and NF EN 13967 standards
    • UNDER-PAVING FILM
      Film under translucent plowing, single-layer polyethylene
      • Prevents moisture rise by capillarity
      • Conforms to DTU 13.3 relating to pavements
      • Complies with CE and NF EN 13967 standards

      Format : 3 m x 66 m - 6 m x 33 m - 3 m x 50 m - 6 m x 25 m - 6 m x 20 m
    • PROTECTIVE FILM
      Protective film made of polyethylene
      • Suitable for all types of work
      • Easy to install
    • ANTI-TERMITE FILM
      Three layer film with a thickness of 150 μm in polyethylene
      • Created a physicochemical barrier against termites
      • Non-washable film which prevents any diffusion of active material
      • Product certified CTB-P + by the FCBA
      • Guaranteed 10 years

      Format : 5 m x 33 m
    • ANTI-TERMITE FILM FACE ADHESIVE
      Format : 75 mm x 66 m
    • ANTI-RADON FILM DOUBLE-FACE ADHESIVE
      Format : 19 mm x 20 m
    • CONNECTOR-ANTI-RADON FILM FACE ADHESIVE
      Format : 50 mm x 25 m
    • MULCHING MAT
      Woven polypropylene green mulch fabric
      • UV-treated product
      • Fastening by staple
      • Permeable to water and air
    • GEOTEXTILE FOR EXTERIOR WORK
      Geotextile in nonwoven needlepunched polypropylene 100 g / m²
      • Stabilizes the floors before laying a pavement or a terrace
      • Allows protection of drainage pipes
    • ANTI-RADON FILM
      Film with a thickness of 200 μm in polyamide
      • Created a genuine barrier to radon gas in construction
      • Indoor / outdoor concentration ratio of 0.45% versus 68% for a conventional 200 μm polyethylene film
    • SUPERIOR ACOUSTIC FOAM
      Polyethylene foam with reticulated closed cells
      • Allows acoustic and thermal insulation
      • Compatible with underfloor heating
    • FINISHING PROFILE

      Profile for fixing the underbody protection to the wall
    • MOUNTING KNOBS WITH NAILS AND WASHERS

      Nails and washers for fixing the profile to the underbody protection
    • BASEMENT PROTECTION

      Polyethylene underbody protection
      Protects bituminous paint Size: 1 mx 20 m - 1.5 mx 20 m - 2 mx 20 m - 2.5 mx 20 m - 3 mx 20 m
    • PROTECTIVE GEOTEXTILE
    • DRAINAGE LINER
    • ROOFING VAPOR BARRIER
    • EPDM CORNER GUARDS
    • ALUMINIUM RAINWATER DRAIN
    • ADJUSTABLE ALUMINIUM LEAF GUARD
    • GALVANIZED STEEL GRAVEL GUARD
    • EPDM RAINWATER DRAIN
    • SHAPED ALUMINIUM FLASHING
    • ALUMINIUM DRIP EDGE FLASHING
    • FASTENING PROFILE
    • EPDM MASTIC
    • DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
    • GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
    • ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
    • EPDM ON EPDM MEMBRANE ADHESIVE - 1 L
    • INSTALLATION TOOL KIT
    • REPAIR KIT
    • SINGLE-USE LIFTING LOOP
    • ANTI-ROOT BARRIER
    • WATERPROOF FLANGE COLLAR
    • PLINTH FOAM
    • PROTECTIVE COVER FOR CEMENT
    • PROTECTIVE COVER FOR GYPSUM BOARD
    • SOFT CONICAL COLLAR EPDM
    • ANCHOR ACCESSORIES
    • ALUMINUM ROOF OUTLET
    • DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
    • PVC FEMALE CAP
    • PVC OVERFLOW WITH 90° BEND
    • PVC DRAINAGE VALVE
    • PVC THROUGH WALL CONNECTION
    • METAL FASTENING CLIPS
    • METAL RINGS
    • GEOKIT® Drained and undrained tertre
    • PVC GEOMEMBRANE 1MM
    • LDPE FILM 400 µm
    • SEPARATION GEOGRID
    • GEOPLUS® SPREADING
    • THREE-LAYER COEXDALLE
    • UNDER-PAVING FILM
    • PROTECTIVE FILM
    • ANTI-TERMITE FILM
    • ANTI-TERMITE FILM FACE ADHESIVE
    • ANTI-RADON FILM DOUBLE-FACE ADHESIVE
    • CONNECTOR-ANTI-RADON FILM FACE ADHESIVE
    • MULCHING MAT
    • GEOTEXTILE FOR EXTERIOR WORK
    • ANTI-RADON FILM
    • SUPERIOR ACOUSTIC FOAM
    • FINISHING PROFILE
    • MOUNTING KNOBS WITH NAILS AND WASHERS
    • BASEMENT PROTECTION
  • In order to facilitate the implementation of your waterproofing project Flexirub will provide you with its catalogue and a set of technical documents:

    Flexirub documentation:
    sealing of technical basins and ornamental ponds


    Our team of specialists is available to support you in your project. To enable us to come back to you with a detailed, costed proposal please take the time to complete your project sheet before making your request for an estimate.

    REQUEST YOUR ESTIMATE

YOUR CONTACT DETAILS
YOUR PROJECT
1000 characters left

OPTIONAL: PROJECT STUDY

To enable us to come back to you with a detailed, costed proposal please take the time to complete the project sheet we have made available for you.

SEND YOUR REQUEST FOR AN ESTIMATE OR INFORMATION

Add files
roof waterproofing

roof waterproofing

prefabricated EPDM membrane
waterproofing for foundations

waterproofing for foundations

prefabricated EPDM membrane
waterproofing for facades

waterproofing for facades

prefabricated EPDM membrane
flexible tanks

flexible tanks

prefabricated EPDM membrane
waterproofing for tanks and basins

waterproofing for tanks and basins

prefabricated EPDM membrane
waterproofing for ULCS

waterproofing for ULCS

prefabricated EPDM membrane
waterproofing for autonomous waste water treatment

waterproofing for autonomous waste water treatment

insulation of buildings

insulation of buildings