EPDM Roofing Systems : Prefabricated rubber membranes EPDM

Flexirub has reinvented EPDM roofing systems with a unique concept and 100% French production.

  • This concept enables us to deliver you a turnkey solution in a single piece and in the precise shape of your project.

    THE DIFFERENT STAGES OF OUR CONCEPT: ENTER THE AGE OF NEW GENERATION WATERPROOFING.

    • Simplified measurement taking using a Laser
    • Production of 3D plans by our Design Office
    • Design of the 3D piece
    • Delivery on the work site with transport traceability
    • Simplified, secure membrane installation
    • Making the waterproofing secure, service life + 50 years
    Buildings are moving from a traditional era to a modern era by prefabrication of the material to secure, simplify and save money.

    RENOVATING THE SEALING OF YOUR FLAT ROOF


    Infiltrations, leaks ... Some people who have built a new house with flat roof sometimes complain of unpleasant disadvantages in terms of waterproofing. The main cause of worries with roof-terraces? The quality of the welding of the bitumen material on site, which weakens the tightness of the flat roof.
    However, there is a way to ensure a perfect waterproofing of the roof terrace.

    Flexirub offers you a secure solution under Technical AdviceReview technique and totally prefabricated in our factory therefore no welding on the site.
    Tightness of a flat roof made of EPDM 3D




    Renovating the watertightness of your flat roof


    SIMPLIFICATION OF MEASUREMENT WITH THE LASER

    SERENITY IN MEASUREMENT

    Thanks to the LEICA Disto S910 laser, the dimensions of the roof are recorded in 3D. The survey takes into account the angles, distances and heights of the roof, so the dimensions of the roof are perfectly transcribed. In addition, the laser takes a picture of each raised point, which allows the design office to check each point in case of doubt. Finally, the entire measurement takes place to a single person in record time.

    DIGITAL FORMAT RECORDED

    The datas are stored in the laser memory as 3D dxf files. Using a USB cable, the datas are then transferred to a computer and sent to the Flexirub design office.

    SOME SPECIFICATIONS ABOUT THE USE OF THE LASER

    The laser is fixed on a tripod and then installed in the middle of the area to be lifted, the operator then targets the significant points of the roof. If the laser point is not visible due to too brightness, the operator uses the digital viewfinder that appears on the screen or moves to check the sight before recording.
    THE ADVANTAGES OF THE LASER
    • Rapidity of measurements, to one person
    • Accuracy and quality of the survey
    • Prevents measurement errors manually
    • A single file (points and photos)
    • Possibility of using the laser for other applications (distance-meter, calculation of surface, computation of slope ...)



    If you would like more information, do not hesitate to contact PRAXI, our partner specialized in laser measurement: www.praxi.fr www.praxi.fr
    02 30 02 61 49 - This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Why should you choose an EPDM waterproofing membrane prefabricated to measure in the factory and ready-to-install?

    Prefabricated made-to-measure waterproofing in EPDM 2D or 3D
    Prefabricated made-to-measure waterproofing in EPDM 2D or 3D
    • Perfectly adaptable to project shapes, including openings
    •   No folds in the corners
    •   All forms of roof possible
    •   Factory-produced details
    •   Traceability of the piece
    Excellent value for money
    Excellent value for money
    •   Multiply the work sites and quadruple your turnover without additional labour costs.
    •  Greatly reduced implementation costs due to the prefabrication
    •  No trimming, no material loss
    •  Maximum longevity of the waterproofing
    Extreme resistance because of the hot vulcanisation
    Extreme resistance because of the hot vulcanisation
    •   Service life of more than 50 years for the EPDM material
    •   Waterproofing piece guaranteed for 10 years
    •   Ultra-resistant, indestructible assemblies
    •   Perfect waterproofing, 100% guaranteed.
    •   Perfect resistance to UV and extreme temperatures (- 40°C to + 120°C)
    Simple and very quick to use
    Simple and very quick to use
    • Very significant time savings
    • Ready-to-install waterproofing piece
    • Simple, very quick bonded or ballasted installation to be implemented with a smaller team
    • No welding on site
    • Smaller installation team, no qualifications as a water proofer required
    • On average installation time divided by 4 compared with traditional solutions that need welding on site
    Secure installation without waterproofing work
    Secure installation without waterproofing work
    •   Freed from the responsibility for the welds which are performed and guaranteed by FLEXIRUB
    •  Secure installation, no more human error for the welding and the details, end of claims due to human error.
    •  No risk of fire or burns, no toxic fumes

    • PERSONAL ARDUOUSNESS PREVENTION ACCOUNT:
      Remove the restrictions of the personal arduousness prevention account
    • Manual handling of loads
    • Painful or tiring positions
    • Extreme temperatures
    The EPDM membrane is environmentally friendly
    The EPDM membrane is environmentally friendly
    •   Long service life
    •   EPDM membrane is recyclable and may be reworked in other applications
    •   No fumes released during installation due to the absence of welding on the work site
    •   Perfectly suitable for fitting out green roofs
  • The advantages of welding by hot vulcanisation

    In order to provide you with a perfectly waterproof membrane all the welding is done in the factory by hot vulcanisation. Manufacture by hot vulcanisation is the most qualitative technology for producing a weld between two elastomers.

    Membrane Epdm 02
    Membrane Epdm 03
    Membrane Epdm 01

    To produce a perfectly watertight pre-fabricated waterproofing membrane we weld several EPDM panels to each other by vulcanisation.
    We place two panels one on top of the other and then insert a band of tape (crude EPDM) which will make it possible to perform the vulcanisation by cross-linking (fusion interlinking the material molecules).
    The assembly is pressed automatically by a robot to obtain perfect, indestructible and controlled welding, thus creating a perfectly waterproof, ultra-resistant assembly. After vulcanisation the assembly becomes a single, homogeneous material both physically and chemically.
    • Ultra-resistant, indestructible assemblies
    • Perfect waterproofing, 100% guaranteed.
    • Perfect homogeneity between the various panels making up the finished product
    • Mechanical resistance of the original sheets reinforced by the total cross-linking (fusion) of the material in the welds.
    Welding by hot vulcanisation



    The 10 stages in the prefabrication of the EPDM 3D membrane

    1
    1 Manufacture of the membrane in 2 dimensions
    2
    2 Membrane ready for production in 3 dimensions
    3
    3 Preparation of the corners
    4
    4 Membrane in 3 dimensions awaiting vulcanisation
    5
    5 Welding of the corners and details in 3 dimensions by vulcanisation
    6
    6 Corners prefabricated in 3 dimensions
    7
    7 Finalised piece in 3 dimensions
    8
    8 Folding and rolling of the membrane
    9
    9 Piece rolled awaiting logistics preparation
    10
    10 Finalised pallet ready for shipping

  • Today flat roof waterproofing is largely carried out with bitumen or synthetic membranes in two dimensions that must be applied directly on the work site.

    OTHER SOLUTIONS

    ASSEMBLY OF ROLLS ON THE WORK SITE

      STUDY
    • Manual measurement socket
    • Installation company

    • SUPPLY
    • Order of rolls and accessories from several suppliers
    • Supply of materials in rolls and accessories
    • Resulting requirements for equipment (gas, blowtorch, etc.)
    • Significant load carrying

    • IMPLEMENTATION
    • Complicated to use, bad odour, dirty
    • Installation duration: 1 day
    • Human intervention (assembly details - corner, chimney, etc.) = risk of errors
    • Working conditions: Heat, Hot tar, Fire

    • ARDUOUSNESS (LEGAL)
    • No load carrying: Manual handling of loads
    • No more prolonged bent over positions: Painful or tiring positions
    • No more heat: Extreme temperatures

    • ECONOMY
    • Cost of the material + labour = 1 day
    • Work sites take longer to carry out
    • Plan more labour

    • PERSONNEL MANAGEMENT
    • Man qualified in waterproofing
    • Compulsory qualification
    • Complication of hiring
    • Rigorous control

    • RESISTANCE OVER THE LONG TERM
    • Service life 10 to 15 years

    • ENVIRONMENTAL FRIENDLINESS
    • No recycling of the material
    • Gives off fumes

    OUR SOLUTION

    PRODUCTION IN THE FACTORY IN A SINGLE PIECE: TURNKEY

      STUDY
    • Simple digital Laser measurement
    • Flexirub Design Office: Time saving, estimate and complete plan (Free)

    • SUPPLY
    • A single supplier
    • A single piece and a single delivery
    • Very little equipment (mounter, mallet, etc.)
    • No load carrying

    • IMPLEMENTATION
    • Easy to use, just needs to be installed, clean, odourless support
    • Installation duration divided by 4
    • No more risk of errors, a single ready-to-install piece with details prefabricated in the factory
    • Working conditions: Only the installation

    • ARDUOUSNESS (LEGAL)
    • The solution enables the personal arduousness prevention account restrictions to be avoided
    • Saving in administrative management

    • ECONOMY
    • Cost of the material + labour + accessories = 0.25 days
    • Multiply the work sites and quadruple your turnover without additional labour costs

    • PERSONNEL MANAGEMENT
    • Building installer
    • No specific qualifications
    • Fewer men
    • Simplicity of the control

    • RESISTANCE OVER THE LONG TERM
    • Service life + than 50 years

    • ENVIRONMENTAL FRIENDLINESS
    • EPDM may be re-used
    • Perfectly suitable for fitting out green roofs

  • Flexirub  reinventes flat roof waterproofingFlexirub  reinventes flat roof waterproofing

    How should an EPDM waterproof membrane be fixed or ballasted on a flat roof or a patio roof?

    The installation of the EPDM membrane is simple and economical as it requires little labour.
    The advantage of EPDM material is that it can be fixed on most supports by bonding or ballasting.


    • The fully adhered installation system
      The fully adhered installation system
      The fixing system by bonding is a simple technique suitable for most roofing configurations. It is particularly suitable for light structures in wood or metal. The fixing technique by bonding is also suitable when renovating the waterproofing for a flat roof, whatever the support.
    • Green roof ballasting
      Green roof ballasting
      The ballast fixing system is the most economical solution for fixing the waterproof membrane.
      It also the system that is used most often
    • Gravel ballasting
      Gravel ballasting
      The ballast fixing system is the most economical solution for fixing the waterproof membrane.
      It also the system that is used most often
    • Ballasting by pavers on paving supports
      Ballasting by pavers on paving supports
      The ballast fixing system is the most economical solution for fixing the waterproof membrane.
      It also the system that is used most often
    • Ballasting with inverted insulation
      Ballasting with inverted insulation
      The ballast fixing system is the most economical solution for fixing the waterproof membrane.
      It also the system that is used most often

      Very fast installation in just 3 steps:


      Unrolling the membrane
      Unrolling the membrane
      Unfolding the membrane
      Unfolding the membrane
      Positioning and adjustment before fixing
      Positioning and adjustment before fixing
    • Flexirub offers you a range of professional accessories to facilitate installation, and finishings for the made-to-measure EPDM membranes.
      PROTECTIVE GEOTEXTILE
      PROTECTIVE GEOTEXTILE
      DRAINAGE LINER
      DRAINAGE LINER
      ROOFING VAPOR BARRIER
      ROOFING VAPOR BARRIER
      EPDM CORNER GUARDS
      EPDM CORNER GUARDS
      ALUMINIUM RAINWATER DRAIN
      ALUMINIUM RAINWATER DRAIN
      ADJUSTABLE ALUMINIUM LEAF GUARD
      ADJUSTABLE ALUMINIUM LEAF GUARD
      GALVANIZED STEEL GRAVEL GUARD
      GALVANIZED STEEL GRAVEL GUARD
      EPDM RAINWATER DRAIN
      EPDM RAINWATER DRAIN
      SHAPED ALUMINIUM FLASHING
      SHAPED ALUMINIUM FLASHING
      ALUMINIUM DRIP EDGE FLASHING
      ALUMINIUM DRIP EDGE FLASHING
      FASTENING PROFILE
      FASTENING PROFILE
      EPDM MASTIC
      EPDM MASTIC
      DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
      DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
      GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
      GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
      ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
      ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
      EPDM ON EPDM MEMBRANE ADHESIVE - 1 L
      EPDM ON EPDM MEMBRANE ADHESIVE - 1 L
      INSTALLATION TOOL KIT
      INSTALLATION TOOL KIT
      REPAIR KIT
      REPAIR KIT
      SINGLE-USE LIFTING LOOP
      SINGLE-USE LIFTING LOOP
      ANTI-ROOT BARRIER
      ANTI-ROOT BARRIER
      WATERPROOF FLANGE COLLAR
      WATERPROOF FLANGE COLLAR
      PLINTH FOAM
      PLINTH FOAM
      PROTECTIVE COVER FOR CEMENT
      PROTECTIVE COVER FOR CEMENT
      PROTECTIVE COVER FOR GYPSUM BOARD
      PROTECTIVE COVER FOR GYPSUM BOARD
      SOFT CONICAL COLLAR EPDM
      SOFT CONICAL COLLAR EPDM
      ANCHOR ACCESSORIES
      ANCHOR ACCESSORIES
      ALUMINUM ROOF OUTLET
      ALUMINUM ROOF OUTLET
      DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
      DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
      PVC FEMALE CAP
      PVC FEMALE CAP
      PVC OVERFLOW WITH 90° BEND
      PVC OVERFLOW WITH 90° BEND
      PVC DRAINAGE VALVE
      PVC DRAINAGE VALVE
      PVC THROUGH WALL CONNECTION
      PVC THROUGH WALL CONNECTION
      METAL FASTENING CLIPS
      METAL FASTENING CLIPS
      METAL RINGS
      METAL RINGS
      GEOKIT® Drained and undrained tertre
      GEOKIT® Drained and undrained tertre
      PVC GEOMEMBRANE 1MM
      PVC GEOMEMBRANE 1MM
      LDPE FILM 400 µm
      LDPE FILM 400 µm
      SEPARATION GEOGRID
      SEPARATION GEOGRID
      GEOPLUS® SPREADING
      GEOPLUS® SPREADING
      THREE-LAYER COEXDALLE
      THREE-LAYER COEXDALLE
      UNDER-PAVING FILM
      UNDER-PAVING FILM
      PROTECTIVE FILM
      PROTECTIVE FILM
      ANTI-TERMITE FILM
      ANTI-TERMITE FILM
      ANTI-TERMITE FILM FACE ADHESIVE
      ANTI-TERMITE FILM FACE ADHESIVE
      ANTI-RADON FILM DOUBLE-FACE ADHESIVE
      ANTI-RADON FILM DOUBLE-FACE ADHESIVE
      CONNECTOR-ANTI-RADON FILM FACE ADHESIVE
      CONNECTOR-ANTI-RADON FILM FACE ADHESIVE
      MULCHING MAT
      MULCHING MAT
      GEOTEXTILE FOR EXTERIOR WORK
      GEOTEXTILE FOR EXTERIOR WORK
      ANTI-RADON FILM
      ANTI-RADON FILM
      SUPERIOR ACOUSTIC FOAM
      SUPERIOR ACOUSTIC FOAM
      FINISHING PROFILE
      FINISHING PROFILE
      MOUNTING KNOBS WITH NAILS AND WASHERS
      MOUNTING KNOBS WITH NAILS AND WASHERS
      BASEMENT PROTECTION
      BASEMENT PROTECTION
      • PROTECTIVE GEOTEXTILE
      • DRAINAGE LINER
      • ROOFING VAPOR BARRIER
      • EPDM CORNER GUARDS
      • ALUMINIUM RAINWATER DRAIN
      • ADJUSTABLE ALUMINIUM LEAF GUARD
      • GALVANIZED STEEL GRAVEL GUARD
      • EPDM RAINWATER DRAIN
      • SHAPED ALUMINIUM FLASHING
      • ALUMINIUM DRIP EDGE FLASHING
      • FASTENING PROFILE
      • EPDM MASTIC
      • DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
      • GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
      • ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
      • EPDM ON EPDM MEMBRANE ADHESIVE - 1 L
      • INSTALLATION TOOL KIT
      • REPAIR KIT
      • SINGLE-USE LIFTING LOOP
      • ANTI-ROOT BARRIER
      • WATERPROOF FLANGE COLLAR
      • PLINTH FOAM
      • PROTECTIVE COVER FOR CEMENT
      • PROTECTIVE COVER FOR GYPSUM BOARD
      • SOFT CONICAL COLLAR EPDM
      • ANCHOR ACCESSORIES
      • ALUMINUM ROOF OUTLET
      • DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
      • PVC FEMALE CAP
      • PVC OVERFLOW WITH 90° BEND
      • PVC DRAINAGE VALVE
      • PVC THROUGH WALL CONNECTION
      • METAL FASTENING CLIPS
      • METAL RINGS
      • GEOKIT® Drained and undrained tertre
      • PVC GEOMEMBRANE 1MM
      • LDPE FILM 400 µm
      • SEPARATION GEOGRID
      • GEOPLUS® SPREADING
      • THREE-LAYER COEXDALLE
      • UNDER-PAVING FILM
      • PROTECTIVE FILM
      • ANTI-TERMITE FILM
      • ANTI-TERMITE FILM FACE ADHESIVE
      • ANTI-RADON FILM DOUBLE-FACE ADHESIVE
      • CONNECTOR-ANTI-RADON FILM FACE ADHESIVE
      • MULCHING MAT
      • GEOTEXTILE FOR EXTERIOR WORK
      • ANTI-RADON FILM
      • SUPERIOR ACOUSTIC FOAM
      • FINISHING PROFILE
      • MOUNTING KNOBS WITH NAILS AND WASHERS
      • BASEMENT PROTECTION
      • PROTECTIVE GEOTEXTILE
        This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration.
      • DRAINAGE LINER
        This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration.

        It is ideally used as part of the geomembrane waterproofing system. The drainage liner separates two materials and acts as a drain for a fluid or gas even in a high pressure environment and/or with a low gradient. It can replace or add to a gravel filter bed. Requires careful installation: be careful not to crush the filter, avoid countersloping, ensure continuity and make sure the filter is well covered.
      • ROOFING VAPOR BARRIER
        This vapor-barrier film is a synthetic film manufactured by polyethylene granule extrusion. The film is EC certified according to standard NF EN 13984 and has been designed for use in CULTISOL made-to-measure EPDM waterproofing installations. It avoids condensation in the waterproofing materials, in particular in insulation panels.
        It is laid down on the flat roof substrate material (concrete, wood or metal). It must be placed on the warm side of the insulation panel. Double-sided adhesive is used to put in place the 10 cm cover and finishings..
      • EPDM CORNER GUARDS
        EPDM membrane corner guards made-to-measure by hot vulcanization.

        Used to reinforce the membrane against abrasion and rubbing. Always used with CULTISOL made-to-measure 3D EPDM membranes to ensure roof watertightness.
      • ALUMINIUM RAINWATER DRAIN
        The rainwater drain is made of stamped, folded aluminum. It is specially designed for use with CULTISOL customized EPDM membranes.
        Drains are set into the roof material (stone, concrete, wood, or metal)to ensure rainwater runoff from flat roofs. The crimp seal system means it can be easily and securely installed on the spot.
      • ADJUSTABLE ALUMINIUM LEAF GUARD
        This adjustable leaf guard is made of aluminum wire. It is specially designed for use with CULTISOL rainwater downpipes.
        They must be positioned over each rainwater downpipe or overflow to avoid clogging by leaves, branches and other rooftop debris. Available in several easy-to-fit diameters.
      • GALVANIZED STEEL GRAVEL GUARD
        This gravel guard is made of galvanized steel. It is specially designed to protect rainwater downpipes against loose dirt and gravel.
        They must be positioned over each rainwater downpipe to prevent them being clogged by gravel used as ballast with CULTISOL madeto- measure EPDM membranes.
      • EPDM RAINWATER DRAIN
        The rainwater drain consists of a rigid PVC pipe (or sleeve) and an EPDM membrane flange. The two components are assembled using a special heat welding technique. Supplied in standard 90, 110 and 125 mm dimensions.
        Used mainly for roof waterproofing, but can also be used in other waterproofing applications. Cold-sealed with Cultisol EPDM on EPDM adhesive or secure
      • SHAPED ALUMINIUM FLASHING
        The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure CULTISOL made-to-measure EPDM membranes.
        The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure FLEXIRUB made-to-measure EPDM membranes.
      • ALUMINIUM DRIP EDGE FLASHING
        Drip edge flashing is shaped by folding a sheet of aluminIum. Specially designed to secure FLEXIRUB made-to-measure EPDM membranes at roof edges.
        The drip edge flashing is used to ensure a perfect finish to sealing upstands.
        It is secured using screws or hammer fixings every 30 cm in the predrilled
      • FASTENING PROFILE
        The Fastening profile are used to mechanically fix EPDM finishes to the wall. They ensure the watertightness of the solution by blocking the water flowing along the wall. Dimensions: 3,74 cm x 3,05 m (sold by 5)
      • EPDM MASTIC
        Flexirub’s EPDM adhesive is a single-component MS polymer-based moisture cured adhesive. For use as a waterproofing and adhesive agent with EPDM membranes. Will secure any kind of bonding. (Please contact Flexirub’s technical department if in doubt over compatibility with certain specific materials)

        Perfect for finishes or for repairing torn or perforated membranes. Multi-purpose adhesive designed to bond with many types of materials: wood, concrete, metal, etc. Before applying, make sure the EPDM surface is clean and free of oil and grease to guarantee perfect bonding. (use only alcohol-based and not petroleum-based cleaning agents). Fiche De Données Sécurité Mastic EPDMFiche De Données Sécurité Mastic EPDM
      • DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
        Double-sided butyl adhesive allowing the junction between EPDM membrane and various fixing supports
        • Used in addition to glues and sealants
        • Ideal for securing a flexible EPDM collar or for fixing a sealing gauge
        Dimensions: Width 25 mm or 50 mm or custom-made
      • GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
        Adhesive based on acrylic resin allowing adhesion of the EPDM membrane on wood and concrete support
        • Solvent-free and odorless glue
        • Gluing by simple gluing
        • Allows repositioning of the membrane

        Up to 30 minutes after application Average consumption: 0.25 liters per 1 m² Volume: 2 L pot or 8 L bucket
        Fiche De Données Sécurité Colle Membrane EPDM Sur Support Bois-BétonFiche De Données Sécurité Colle Membrane EPDM Sur Support Bois-Béton
      • ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
        A synthetic polymer contact adhesive used to fix the EPDM membrane to any surface, such as masonry, wood, metal or other compatible materials. Available in 5-liter cans.

        Fiche De Données Sécurité Colle Membrane EPDM Tout SupportFiche De Données Sécurité Colle Membrane EPDM Tout Support
      • EPDM ON EPDM MEMBRANE ADHESIVE - 1 L
        A liquid butyl-based adhesive for EPDM membrane to membrane assembly, and to guarantee that the protection remains leak proof. Available in 1-liter cans.

        Fiche De Données Sécurité Colle Membrane EPDM Sur EPDMFiche De Données Sécurité Colle Membrane EPDM Sur EPDM
      • INSTALLATION TOOL KIT
        Kit of installation tools allowing a perfect installation of the membrane and accessories Composed of a pair of scissors, a marking pencil, a brush, a roller, a masking tape, a mastic cartridge and a putty gun.
      • REPAIR KIT
        Kit consisting of a square EPDM membrane, a butyl glue, a mastic cartridge And abrasive paper to allow cleaning before repairing a damaged membrane
      • SINGLE-USE LIFTING LOOP
        Flexirub supplies three types of lifting loop to facilitate movement of the EPDM geomembrane rolls.
        Dimensions:
        - Maximum working load of 500 kg: 30 mm x 5 m
        - Maximum working load of 1000 kg: 60 mm x 5 m
        - Maximum working load of 1500 kg: 90 mm x 5 m
      • ANTI-ROOT BARRIER
        The root barrier protects sensitive areas by deflecting roots downwards. The Isofilma root barrier consists of a non-woven, 100% polypropylene fiber geotextile, coated with polypropylene on both sides. This combination creates an extremely strong barrier that is impenetrable to roots whilst guaranteeing healthy development of trees and plantings. Dimensions: 1.40 x 25 m

        ADVANTAGES
        • Exceptionally long-lasting (25 years)
        • Impact resistant
        • Light and easy to use
        • Resistant to bacteria and chemicals
        • Specific anti-UV treatment
        • No risk to the environment - product is fully recyclable
      • WATERPROOF FLANGE COLLAR
        The waterproof flange collar is the only 100% waterproof solution on the market. It is composed of two distinct parts: - A first sticker that allows to adjust its drilling, to avoid tearing and to guide the pipe during the installation. - A second part assembled by clamping, consisting of two flanges and a joint.
      • PLINTH FOAM
        The 3 mm skirting foam contributes to the acoustic and thermal insulation of floating floors and floor coverings. The Isofilma skirting foam is produced by non-polluting processes and is totally free of chlorine, emollients, halogens, sulfur, silicones and stabilizers from heavy metals.
        Dimensions : 100 mm x 50 m.

        ADVANTAGES
        • Avoids sound bridges and tile cracks
        • Heatable floor heating
        • Respects the expansion of the parquet
        • Two thicknesses available for different performance levels
      • PROTECTIVE COVER FOR CEMENT
        Translucent cover to protect the cement from moisture. Dimensions : 1,25 m (2 x 0,6 m) x 1,70 m.

        ADVANTAGE
        Allows cement storage outside
      • PROTECTIVE COVER FOR GYPSUM BOARD
        Translucent cover to protect drywall against moisture.
        Dimensions: 4 mx 1.8 m or 4.5 mx 1.8 m.

        ADVANTAGE
        Allows storage of plasterboard outside
      • SOFT CONICAL COLLAR EPDM
        The flexible conical flange is the ideal solution for all connections on variable diameters. It is manufactured from a base and an EPDM sleeve manufactured in a cone with a diameter of 50mm to a diameter of 200mm. The assembly is fully assembled by hot vulcanization
      • ANCHOR ACCESSORIES
        Flexirub offers different accessories to facilitate the anchoring of its membranes. They are classified into two distinct categories: eyelets and fastening rings.

        Features:
        • Stainless steel eyelets: Øint 9 mm or 15 mm or 25 mm
        • Nickel-plated brass eyelets: Øint 40 mm
        • "Half-moon" or "triangle" rings: Ø 6 mm x 50 mm
      • ALUMINUM ROOF OUTLET
        The roof outlet is made of stamped, folded aluminum. It is specially designed for use with FLEXIRUB customized EPDM membranes
        Overflows are set into the roof material (stone, concrete, wood, or metal) so as to ensure rainwater runoff in case the downpipes cannot cope. The crimp seal system means it can be easily and securely installed on the spot.
      • DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
        Allows to connect the widths of vapor barrier film to each other
        • Facilitates the fixation of the film on the support

        Format: 60mmx20m
      • PVC FEMALE CAP
        Female-threaded PVC end caps are designed to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
        They are used as end caps on CULTISOL EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints.
      • PVC OVERFLOW WITH 90° BEND
        The 90° elbow fittings are threaded at both ends to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
        They are used as drain outlet accessories on Flexirub EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints.
      • PVC DRAINAGE VALVE
        PVC-uH valves are simple quarter turn open/shut fittings. Threaded at both ends to allow easy connexion to other pipes. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
      • PVC THROUGH WALL CONNECTION
        Allows the formation of a tight connection between the filling elements (tap, supply pipe, etc.) and the interior of the flexible tank
        • Consists of a threaded spindle, two nuts and two EPDM flat seals
      • METAL FASTENING CLIPS
        Permit secure attachment of ground protection geotextile
      • METAL RINGS
        Stainless steel for excellent resistance to corrosion and aging
        • Made by hot forging for superior mechanical strength

        Format: Triangle and Half Moon
      • GEOKIT® Drained and undrained tertre
        This GeoKit® contains the following components:
        • 1 separation geogrid
        • 1 separation geotextile 150 g / m²
        • 1 LDPE film 0.4 mm (in the case of the drained mound)
        • 1 watertight flange collar (in the case of the drained mound)
        • 1 adhesive collar (in the case of the drained mound)
      • PVC GEOMEMBRANE 1MM
        Complies with NF DTU 64.1
        • Allows waterproofing of drained sand filters
      • LDPE FILM 400 µm
        This black 0.4 mm LDPE coextruded film offers very good mechanical resistance properties, thanks to its triple-layer technology. Rotproof and waterproof.
        Black LDPE 400 μm film is used in self-standing wastewater treatment systems, in particular to ensure watertightness in watertight drained sand filter, raised bed or compact sand filter systems. It can also be used in undrained sand filter systems, for lateral watertightness.
      • SEPARATION GEOGRID
        The separation geogrid, or filtration grid, is manufactured from High- Density Polyethylene (HDPE). The material is highly-resilient while maintaining a degree of flexibility. For optimal efficiency, the geogrid must be used with a separation and filtration geotextile to retain the finest particles and avoid clogging.

        The geogrid is mainyl used in waste-water treatment installations. It is used in particular to separate different granular layers. It is mandatory with a sand filter or other artifical soil filtration systems.
      • GEOPLUS® SPREADING
        Allows separation of gravel and topsoil in trenches
      • THREE-LAYER COEXDALLE
        • Prevents moisture rise by capillarities
        • Complies with DTU 13.3 relating to pavements
        • Complies with CE and NF EN 13967 standards

        Three-layer polyethylene three-layer underpadding film
        • Prevents moisture rise by capillarity
        • Conforms to DTU 13.3 relating to pavements
        • Complies with CE and NF EN 13967 standards
      • UNDER-PAVING FILM
        Film under translucent plowing, single-layer polyethylene
        • Prevents moisture rise by capillarity
        • Conforms to DTU 13.3 relating to pavements
        • Complies with CE and NF EN 13967 standards

        Format : 3 m x 66 m - 6 m x 33 m - 3 m x 50 m - 6 m x 25 m - 6 m x 20 m
      • PROTECTIVE FILM
        Protective film made of polyethylene
        • Suitable for all types of work
        • Easy to install
      • ANTI-TERMITE FILM
        Three layer film with a thickness of 150 μm in polyethylene
        • Created a physicochemical barrier against termites
        • Non-washable film which prevents any diffusion of active material
        • Product certified CTB-P + by the FCBA
        • Guaranteed 10 years

        Format : 5 m x 33 m
      • ANTI-TERMITE FILM FACE ADHESIVE
        Format : 75 mm x 66 m
      • ANTI-RADON FILM DOUBLE-FACE ADHESIVE
        Format : 19 mm x 20 m
      • CONNECTOR-ANTI-RADON FILM FACE ADHESIVE
        Format : 50 mm x 25 m
      • MULCHING MAT
        Woven polypropylene green mulch fabric
        • UV-treated product
        • Fastening by staple
        • Permeable to water and air
      • GEOTEXTILE FOR EXTERIOR WORK
        Geotextile in nonwoven needlepunched polypropylene 100 g / m²
        • Stabilizes the floors before laying a pavement or a terrace
        • Allows protection of drainage pipes
      • ANTI-RADON FILM
        Film with a thickness of 200 μm in polyamide
        • Created a genuine barrier to radon gas in construction
        • Indoor / outdoor concentration ratio of 0.45% versus 68% for a conventional 200 μm polyethylene film
      • SUPERIOR ACOUSTIC FOAM
        Polyethylene foam with reticulated closed cells
        • Allows acoustic and thermal insulation
        • Compatible with underfloor heating
      • FINISHING PROFILE

        Profile for fixing the underbody protection to the wall
      • MOUNTING KNOBS WITH NAILS AND WASHERS

        Nails and washers for fixing the profile to the underbody protection
      • BASEMENT PROTECTION

        Polyethylene underbody protection
        Protects bituminous paint Size: 1 mx 20 m - 1.5 mx 20 m - 2 mx 20 m - 2.5 mx 20 m - 3 mx 20 m
      • PROTECTIVE GEOTEXTILE
      • DRAINAGE LINER
      • ROOFING VAPOR BARRIER
      • EPDM CORNER GUARDS
      • ALUMINIUM RAINWATER DRAIN
      • ADJUSTABLE ALUMINIUM LEAF GUARD
      • GALVANIZED STEEL GRAVEL GUARD
      • EPDM RAINWATER DRAIN
      • SHAPED ALUMINIUM FLASHING
      • ALUMINIUM DRIP EDGE FLASHING
      • FASTENING PROFILE
      • EPDM MASTIC
      • DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
      • GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
      • ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
      • EPDM ON EPDM MEMBRANE ADHESIVE - 1 L
      • INSTALLATION TOOL KIT
      • REPAIR KIT
      • SINGLE-USE LIFTING LOOP
      • ANTI-ROOT BARRIER
      • WATERPROOF FLANGE COLLAR
      • PLINTH FOAM
      • PROTECTIVE COVER FOR CEMENT
      • PROTECTIVE COVER FOR GYPSUM BOARD
      • SOFT CONICAL COLLAR EPDM
      • ANCHOR ACCESSORIES
      • ALUMINUM ROOF OUTLET
      • DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
      • PVC FEMALE CAP
      • PVC OVERFLOW WITH 90° BEND
      • PVC DRAINAGE VALVE
      • PVC THROUGH WALL CONNECTION
      • METAL FASTENING CLIPS
      • METAL RINGS
      • GEOKIT® Drained and undrained tertre
      • PVC GEOMEMBRANE 1MM
      • LDPE FILM 400 µm
      • SEPARATION GEOGRID
      • GEOPLUS® SPREADING
      • THREE-LAYER COEXDALLE
      • UNDER-PAVING FILM
      • PROTECTIVE FILM
      • ANTI-TERMITE FILM
      • ANTI-TERMITE FILM FACE ADHESIVE
      • ANTI-RADON FILM DOUBLE-FACE ADHESIVE
      • CONNECTOR-ANTI-RADON FILM FACE ADHESIVE
      • MULCHING MAT
      • GEOTEXTILE FOR EXTERIOR WORK
      • ANTI-RADON FILM
      • SUPERIOR ACOUSTIC FOAM
      • FINISHING PROFILE
      • MOUNTING KNOBS WITH NAILS AND WASHERS
      • BASEMENT PROTECTION
    • In order to facilitate the implementation of your waterproofing project Flexirub will provide you with its catalogue and a set of technical documents.

      Your documents



      Our team of specialists is available to support you in your project. To enable us to come back to you with a detailed, costed proposal please take the time to complete your project sheet before making your request for an estimate.

      REQUEST YOUR ESTIMATE