Waterproofing of facades
Why should you choose EPDM strips for waterproofing, airtightness and damp-proofing façades?
The waterproofing strips are ultra-high performance, suitable for any type of support
- Exceptional air- and water-tightness (water vapour transmission factor μ = 2,000,000 for EPDM/butyl)
- Can be used on any type of support for any applications linked to impermeability
- Standard sizes or made to measure
- Meets French standards
The EPDM waterproofing strips are produced by hot vulcanisation giving extreme resistance
- Maximum solidity of the welds due to the hot vulcanisation
- Excellent mechanical resistance (traction, elasticity, static puncture)
- Strip guaranteed for 10 years
- Service life of more than 50 years for the EPDM material
- Perfect resistance to UV and extreme temperatures (- 40°C to + 120°C)
An economical solution that is more environmentally friendly
- Clean, non-toxic material guaranteeing hazard-free installation
- Significantly lower labour costs
- No trimming or material loss
- Maximum longevity of the waterproofing
- Synthetic membrane that is more ecological than bitumen paints
The EPDM strips are fixed in complete safety, without on-site welding
- No flame welding or hot air soldering irons on the work site
- No risk of fire or burns
- No fumes
- No odour
A self-adhesive fixing system to optimise the installation time for the waterproof strips
- Self-adhesive fixing (EPDM/butyl) or by bonding (EPDM)
- Simplicity of finishes with a complete range of accessories and tools
Simple and quick to use in a smaller team, and no welding
- Quick, easy installation
- Removes the use of chemical and bituminous waterproofing products
- No welding on site
- Smaller installation team
As a result of its experience in building waterproofing
Flexirub has been able to develop a new generation
of multi-use waterproofing stripsThroughout their life building façades are subjected to weather conditions which vary enormously: action of wind and water, thermal movements or even large variations in temperature.
Building waterproofing must therefore combine a whole series of requirements to resist these continual attacks: solidity, longevity, elasticity, resistance to bad weather and air pollution. The Flexirub waterproofing system meets all these requirements.The EPDM strips which Flexirub has developed make it possible to provide high quality waterproofing for your façades, windows and wood or masonry walls.
The EPDM strip is a light, waterproof, elastic elastomer membrane. Its formulation was developed to meet the requirements for waterproofing façades.
This system prevents rain and water from penetrating buildings and air leaks into the structure.Flexirub offers a range of EPDM waterproofing strips.
EPDM strips
The Flexirub EPDM strip for façades is a rubber-based elastomer waterproofing membrane, EPDM 1 mm, which guarantees a high water vapour transmission factor. The EPDM strip has a 2-sided textile footprint so as to obtain maximum adhesion to the support. It can be put in place with adhesive or mastic depending on the support on which this waterproofing membrane is placed.1 mm membrane
25 metre roll
10 to 60 cm wide.Advantages of EPDM strips
- Perfectly waterproof membrane
- High water vapour transmission factor
(μ = 98,000) - Adapts to the movements of the building due to the elasticity of the EPDM
EPDM/Butyl strips
The self-adhesive EPDM/Butyl strip for façades from Flexirub is a waterproofing strip made up of one 1 mm thick layer of EPDM and one adhesive layer of 0.6 mm thick Butyl. The combination of EPDM and Butyl makes it possible to obtain a 1.6 mm thick waterproofing strip with an exceptional water vapour transmission factor. In addition, the Butyl-based adhesive strips facilitate positioning when the waterproofing is being put in place.1.6 mm self-adhesive membrane
20 metre roll
10 to 60 cm wideAdvantages of self-adhesive EPDM/Butyl strips
- Simple to install because of the self-adhesive Butyl
- Perfectly waterproof membrane
- High water vapour transmission factor
(μ = 98,000) - Adapts to the movements of the building due to the elasticity of the EPDM
EPDM levelling course strips
The Flexirub EPDM levelling course strip is an EPDM rubber-based elastomer waterproofing membrane. It is recommended for any type of partition and underground wall, and is a safe, perfectly waterproof protection, which prevents rising damp and absorption of water in the load-bearing walls. It is light and easy to use, adheres easily and reduces the risk of shearing.Waterproofing membrane
preventing damp from rising
25 metre rolls
20 to 40 cm wide.
Thickness: 0.6 mm or 0.75 mm.Advantages of EPDM levelling course strips
- Protects the building from capillary rise coming from the ground
- Good water vapour transmission factor
(μ = 32,000) - Adapts to the movements of the building due to the elasticity of the EPDM
- Different water vapour permeability’s depending on the role of the facades
Flexirub has developed a complete system to protect façades, windows and walls against water, bad weather, and damp and also to guarantee perfect airtightness.
The waterproofing strips are recommended for all waterproofing finishing work. They are studied and designed to provide perfect air-and water-tightness. Furthermore, the EPDM/butyl strip is particularly suitable for this application, particularly in the context of RT2012. The EPDM and EPDM/butyl waterproofing strips will make it possible to create a real barrier in the façades to:- Water rising by capillarity (levelling course strip)
- Water penetration into the building (waterproofing under cladding)
- Air entering the structure (tightness of joinery work)
Flexirub offers you a range of professional accessories to facilitate installation, and finishings for the made-to-measure EPDM membranes.
PROTECTIVE GEOTEXTILE
This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration.DRAINAGE LINER
This drainage liner is a geocomposite consisting of a tridimensional polypropylene strands sandwiched between two thermomolded filtering geotextile layers. It performs all of the following 3 functions: drainage, separation and filtration.
It is ideally used as part of the geomembrane waterproofing system. The drainage liner separates two materials and acts as a drain for a fluid or gas even in a high pressure environment and/or with a low gradient. It can replace or add to a gravel filter bed. Requires careful installation: be careful not to crush the filter, avoid countersloping, ensure continuity and make sure the filter is well covered.ROOFING VAPOR BARRIER
This vapor-barrier film is a synthetic film manufactured by polyethylene granule extrusion. The film is EC certified according to standard NF EN 13984 and has been designed for use in CULTISOL made-to-measure EPDM waterproofing installations. It avoids condensation in the waterproofing materials, in particular in insulation panels.
It is laid down on the flat roof substrate material (concrete, wood or metal). It must be placed on the warm side of the insulation panel. Double-sided adhesive is used to put in place the 10 cm cover and finishings..EPDM CORNER GUARDS
EPDM membrane corner guards made-to-measure by hot vulcanization.
Used to reinforce the membrane against abrasion and rubbing. Always used with CULTISOL made-to-measure 3D EPDM membranes to ensure roof watertightness.ALUMINIUM RAINWATER DRAIN
The rainwater drain is made of stamped, folded aluminum. It is specially designed for use with CULTISOL customized EPDM membranes.
Drains are set into the roof material (stone, concrete, wood, or metal)to ensure rainwater runoff from flat roofs. The crimp seal system means it can be easily and securely installed on the spot.ADJUSTABLE ALUMINIUM LEAF GUARD
This adjustable leaf guard is made of aluminum wire. It is specially designed for use with CULTISOL rainwater downpipes.
They must be positioned over each rainwater downpipe or overflow to avoid clogging by leaves, branches and other rooftop debris. Available in several easy-to-fit diameters.GALVANIZED STEEL GRAVEL GUARD
This gravel guard is made of galvanized steel. It is specially designed to protect rainwater downpipes against loose dirt and gravel.
They must be positioned over each rainwater downpipe to prevent them being clogged by gravel used as ballast with CULTISOL madeto- measure EPDM membranes.EPDM RAINWATER DRAIN
The rainwater drain consists of a rigid PVC pipe (or sleeve) and an EPDM membrane flange. The two components are assembled using a special heat welding technique. Supplied in standard 90, 110 and 125 mm dimensions.
Used mainly for roof waterproofing, but can also be used in other waterproofing applications. Cold-sealed with Cultisol EPDM on EPDM adhesive or secureSHAPED ALUMINIUM FLASHING
The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure CULTISOL made-to-measure EPDM membranes.
The flashing is shaped by folding a sheet of aluminum. Specially designed to mechanically secure FLEXIRUB made-to-measure EPDM membranes.ALUMINIUM DRIP EDGE FLASHING
Drip edge flashing is shaped by folding a sheet of aluminIum. Specially designed to secure FLEXIRUB made-to-measure EPDM membranes at roof edges.
The drip edge flashing is used to ensure a perfect finish to sealing upstands.
It is secured using screws or hammer fixings every 30 cm in the predrilledFASTENING PROFILE
The Fastening profile are used to mechanically fix EPDM finishes to the wall. They ensure the watertightness of the solution by blocking the water flowing along the wall. Dimensions: 3,74 cm x 3,05 m (sold by 5)EPDM MASTIC
Flexirub’s EPDM adhesive is a single-component MS polymer-based moisture cured adhesive. For use as a waterproofing and adhesive agent with EPDM membranes. Will secure any kind of bonding. (Please contact Flexirub’s technical department if in doubt over compatibility with certain specific materials)
Perfect for finishes or for repairing torn or perforated membranes. Multi-purpose adhesive designed to bond with many types of materials: wood, concrete, metal, etc. Before applying, make sure the EPDM surface is clean and free of oil and grease to guarantee perfect bonding. (use only alcohol-based and not petroleum-based cleaning agents). Fiche De Données Sécurité Mastic EPDM
DOUBLE FACE ADHESIVES FOR EPDM MEMBRANE
Double-sided butyl adhesive allowing the junction between EPDM membrane and various fixing supports- Used in addition to glues and sealants
- Ideal for securing a flexible EPDM collar or for fixing a sealing gauge
GLUE FOR EPDM MEMBRANE ON WOOD AND CONCRETE SUPPORT
Adhesive based on acrylic resin allowing adhesion of the EPDM membrane on wood and concrete support
• Solvent-free and odorless glue
• Gluing by simple gluing
• Allows repositioning of the membrane
Up to 30 minutes after application Average consumption: 0.25 liters per 1 m² Volume: 2 L pot or 8 L bucket
Fiche De Données Sécurité Colle Membrane EPDM Sur Support Bois-Béton ALL-SURFACE EPDM MEMBRANE ADHESIVE - 5 L
A synthetic polymer contact adhesive used to fix the EPDM membrane to any surface, such as masonry, wood, metal or other compatible materials. Available in 5-liter cans.
Fiche De Données Sécurité Colle Membrane EPDM Tout SupportEPDM ON EPDM MEMBRANE ADHESIVE - 1 L
A liquid butyl-based adhesive for EPDM membrane to membrane assembly, and to guarantee that the protection remains leak proof. Available in 1-liter cans.
Fiche De Données Sécurité Colle Membrane EPDM Sur EPDM INSTALLATION TOOL KIT
Kit of installation tools allowing a perfect installation of the membrane and accessories Composed of a pair of scissors, a marking pencil, a brush, a roller, a masking tape, a mastic cartridge and a putty gun.REPAIR KIT
Kit consisting of a square EPDM membrane, a butyl glue, a mastic cartridge And abrasive paper to allow cleaning before repairing a damaged membraneSINGLE-USE LIFTING LOOP
Flexirub supplies three types of lifting loop to facilitate movement of the EPDM geomembrane rolls.
Dimensions:
- Maximum working load of 500 kg: 30 mm x 5 m
- Maximum working load of 1000 kg: 60 mm x 5 m
- Maximum working load of 1500 kg: 90 mm x 5 mANTI-ROOT BARRIER
The root barrier protects sensitive areas by deflecting roots downwards. The Isofilma root barrier consists of a non-woven, 100% polypropylene fiber geotextile, coated with polypropylene on both sides. This combination creates an extremely strong barrier that is impenetrable to roots whilst guaranteeing healthy development of trees and plantings. Dimensions: 1.40 x 25 m
ADVANTAGES- Exceptionally long-lasting (25 years)
- Impact resistant
- Light and easy to use
- Resistant to bacteria and chemicals
- Specific anti-UV treatment
- No risk to the environment - product is fully recyclable
WATERPROOF FLANGE COLLAR
The waterproof flange collar is the only 100% waterproof solution on the market. It is composed of two distinct parts: - A first sticker that allows to adjust its drilling, to avoid tearing and to guide the pipe during the installation. - A second part assembled by clamping, consisting of two flanges and a joint.PLINTH FOAM
The 3 mm skirting foam contributes to the acoustic and thermal insulation of floating floors and floor coverings. The Isofilma skirting foam is produced by non-polluting processes and is totally free of chlorine, emollients, halogens, sulfur, silicones and stabilizers from heavy metals.
Dimensions : 100 mm x 50 m.
ADVANTAGES- Avoids sound bridges and tile cracks
- Heatable floor heating
- Respects the expansion of the parquet
- Two thicknesses available for different performance levels
PROTECTIVE COVER FOR CEMENT
Translucent cover to protect the cement from moisture. Dimensions : 1,25 m (2 x 0,6 m) x 1,70 m.
ADVANTAGE
Allows cement storage outsidePROTECTIVE COVER FOR GYPSUM BOARD
Translucent cover to protect drywall against moisture.
Dimensions: 4 mx 1.8 m or 4.5 mx 1.8 m.
ADVANTAGE
Allows storage of plasterboard outsideSOFT CONICAL COLLAR EPDM
The flexible conical flange is the ideal solution for all connections on variable diameters. It is manufactured from a base and an EPDM sleeve manufactured in a cone with a diameter of 50mm to a diameter of 200mm. The assembly is fully assembled by hot vulcanizationANCHOR ACCESSORIES
Flexirub offers different accessories to facilitate the anchoring of its membranes. They are classified into two distinct categories: eyelets and fastening rings.
Features:- Stainless steel eyelets: Øint 9 mm or 15 mm or 25 mm
- Nickel-plated brass eyelets: Øint 40 mm
- "Half-moon" or "triangle" rings: Ø 6 mm x 50 mm
ALUMINUM ROOF OUTLET
The roof outlet is made of stamped, folded aluminum. It is specially designed for use with FLEXIRUB customized EPDM membranes
Overflows are set into the roof material (stone, concrete, wood, or metal) so as to ensure rainwater runoff in case the downpipes cannot cope. The crimp seal system means it can be easily and securely installed on the spot.DOUBLE SIDED ADHESIVE VAPOR BARRIER ROOFING
Allows to connect the widths of vapor barrier film to each other
• Facilitates the fixation of the film on the support
Format: 60mmx20mPVC FEMALE CAP
Female-threaded PVC end caps are designed to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
They are used as end caps on CULTISOL EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints.PVC OVERFLOW WITH 90° BEND
The 90° elbow fittings are threaded at both ends to allow easy connexion with various CULTISOL waterproofing items. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.
They are used as drain outlet accessories on Flexirub EPDM bladder tanks. Connexions must be made watertight using enough teflon (PTFE) to eliminate any play and avoid over-tightening. Never use oakum or other sealants used for metal plumbing joints.PVC DRAINAGE VALVE
PVC-uH valves are simple quarter turn open/shut fittings. Threaded at both ends to allow easy connexion to other pipes. Off-the-shelf fittings have a standard diameter, but customized diameters are available on demand.PVC THROUGH WALL CONNECTION
Allows the formation of a tight connection between the filling elements (tap, supply pipe, etc.) and the interior of the flexible tank
• Consists of a threaded spindle, two nuts and two EPDM flat sealsMETAL FASTENING CLIPS
Permit secure attachment of ground protection geotextileMETAL RINGS
Stainless steel for excellent resistance to corrosion and aging
• Made by hot forging for superior mechanical strength
Format: Triangle and Half MoonGEOKIT® Drained and undrained tertre
This GeoKit® contains the following components:- 1 separation geogrid
- 1 separation geotextile 150 g / m²
- 1 LDPE film 0.4 mm (in the case of the drained mound)
- 1 watertight flange collar (in the case of the drained mound)
- 1 adhesive collar (in the case of the drained mound)
PVC GEOMEMBRANE 1MM
Complies with NF DTU 64.1
• Allows waterproofing of drained sand filtersLDPE FILM 400 µm
This black 0.4 mm LDPE coextruded film offers very good mechanical resistance properties, thanks to its triple-layer technology. Rotproof and waterproof.
Black LDPE 400 μm film is used in self-standing wastewater treatment systems, in particular to ensure watertightness in watertight drained sand filter, raised bed or compact sand filter systems. It can also be used in undrained sand filter systems, for lateral watertightness.SEPARATION GEOGRID
The separation geogrid, or filtration grid, is manufactured from High- Density Polyethylene (HDPE). The material is highly-resilient while maintaining a degree of flexibility. For optimal efficiency, the geogrid must be used with a separation and filtration geotextile to retain the finest particles and avoid clogging.
The geogrid is mainyl used in waste-water treatment installations. It is used in particular to separate different granular layers. It is mandatory with a sand filter or other artifical soil filtration systems.GEOPLUS® SPREADING
Allows separation of gravel and topsoil in trenchesTHREE-LAYER COEXDALLE
• Prevents moisture rise by capillarities
• Complies with DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards
Three-layer polyethylene three-layer underpadding film
• Prevents moisture rise by capillarity
• Conforms to DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standardsUNDER-PAVING FILM
Film under translucent plowing, single-layer polyethylene
• Prevents moisture rise by capillarity
• Conforms to DTU 13.3 relating to pavements
• Complies with CE and NF EN 13967 standards
Format : 3 m x 66 m - 6 m x 33 m - 3 m x 50 m - 6 m x 25 m - 6 m x 20 mPROTECTIVE FILM
Protective film made of polyethylene
• Suitable for all types of work
• Easy to installANTI-TERMITE FILM
Three layer film with a thickness of 150 μm in polyethylene
• Created a physicochemical barrier against termites
• Non-washable film which prevents any diffusion of active material
• Product certified CTB-P + by the FCBA
• Guaranteed 10 years
Format : 5 m x 33 mANTI-TERMITE FILM FACE ADHESIVE
Format : 75 mm x 66 mANTI-RADON FILM DOUBLE-FACE ADHESIVE
Format : 19 mm x 20 mCONNECTOR-ANTI-RADON FILM FACE ADHESIVE
Format : 50 mm x 25 mMULCHING MAT
Woven polypropylene green mulch fabric
• UV-treated product
• Fastening by staple
• Permeable to water and airGEOTEXTILE FOR EXTERIOR WORK
Geotextile in nonwoven needlepunched polypropylene 100 g / m²
• Stabilizes the floors before laying a pavement or a terrace
• Allows protection of drainage pipesANTI-RADON FILM
Film with a thickness of 200 μm in polyamide
• Created a genuine barrier to radon gas in construction
• Indoor / outdoor concentration ratio of 0.45% versus 68% for a conventional 200 μm polyethylene filmSUPERIOR ACOUSTIC FOAM
Polyethylene foam with reticulated closed cells
• Allows acoustic and thermal insulation
• Compatible with underfloor heatingFINISHING PROFILE
Profile for fixing the underbody protection to the wallMOUNTING KNOBS WITH NAILS AND WASHERS
Nails and washers for fixing the profile to the underbody protectionBASEMENT PROTECTION
Polyethylene underbody protection
Protects bituminous paint Size: 1 mx 20 m - 1.5 mx 20 m - 2 mx 20 m - 2.5 mx 20 m - 3 mx 20 m
In order to facilitate the implementation of your waterproofing project Flexirub will provide you with its catalogue and a set of technical documents:
Flexirub documentation:
EPDM waterproofing strips
Our team of specialists is available to support you in your project. To enable us to come back to you with a detailed, costed proposal please take the time to complete our information request form.
CONTACT US
